|
Implementers’ Guide for ITU-T Rec. G.8010/Y.1306
(02/2004) - Architecture of Ethernet layer
networks |
G.100 |
Definitions used in Recommendations on general
characteristics of international telephone
connections and circuits
|
G.100.1 |
The use of the decibel and of relative levels in
speechband telecommunications
|
G.101 |
The transmission plan
|
G.102 |
Transmission performance objectives and
Recommendations |
G.103 |
Hypothetical reference connections
|
G.105 |
Hypothetical reference connection for crosstalk
studies |
G.107 |
The E-model, a computational model for use in
transmission planning
|
G.108 |
Application of the E-model: A planning guide
Covering note, November 2000: Erratum
|
G.108.1 |
Guidance for assessing conversational speech
transmission quality effects not covered by the
E-Model |
G.108.2 |
Transmission planning aspects of echo cancellers
|
G.109 |
Definition of categories of speech transmission
quality |
G.111 |
Loudness ratings (LRs) in an international
connection |
G.113 |
Transmission impairments due to speech
processing |
G.114 |
One-way transmission time
|
G.115 |
Mean active speech level for announcement and
speech synthesis systems
|
G.116 |
Transmission performance objectives applicable
to end-to-end international connections
|
G.117 |
Transmission aspects of unbalance about earth
|
G.120 |
Transmission characteristics of national
networks |
G.121 |
Loudness ratings (LRs) of national systems
|
G.122 |
Influence of national systems on stability and
talker echo in international connections
|
G.123 |
[Withdrawn] Circuit
noise in national networks
The content of this Recommendation is now
covered by ITU-T G.120 |
G.125 |
[Withdrawn]
Characteristics of national circuits on carrier
systems
The content of this Recommendation is now
covered by ITU-T G.120 |
G.126 |
Listener echo in telephone networks
|
G.131 |
Talker echo and its control
|
G.132 |
[Withdrawn] Attenuation
distortion
The content of this Recommendation is now
covered by ITU-T G.120 |
G.133 |
[Withdrawn] Group-delay
distortion
The content of this Recommendation is now
covered by ITU-T G.120 |
G.134 |
[Withdrawn] Linear
crosstalk
The content of this Recommendation is now
covered by ITU-T G.120 |
G.135 |
[Withdrawn] Error on
the reconstituted frequency
The content of this Recommendation is now
covered by ITU-T G.120 |
G.136 |
Application rules for automatic level control
devices
Covering note, May 2000: Erratum |
G.141 |
[Withdrawn] Attenuation
distortion
The content of this Recommendation is now
covered by ITU-T G.120 |
G.142 |
Transmission characteristics of exchanges
|
G.143 |
[Withdrawn] Circuit
noise and the use of compandors |
G.151 |
[Withdrawn] General
performance objectives applicable to all modern
international circuits and national extension
circuits
The content of this Recommendation is now
covered by ITU-T G.120 |
G.152 |
[Withdrawn]
Characteristics appropriate to long-distance
circuits of a length not exceeding 2500 km
The content of this Recommendation is now
covered by ITU-T G.120 |
G.153 |
[Withdrawn]
Characteristics appropriate to international
circuits more than 2500 km in length
The content of this Recommendation is now
covered by ITU-T G.120 |
G.161 |
Interaction aspects of signal processing network
equipment |
G.162 |
[Withdrawn]
Characteristics of compandors for telephony |
G.163 |
[Withdrawn] Call
concentrating systems |
G.164 |
Echo suppressors
|
G.165 |
Echo cancellers |
G.166 |
[Withdrawn]
Characteristics of syllabic compandors for
telephony on high capacity long distance systems
|
G.167 |
[Withdrawn] Acoustic
echo controllers
|
G.168 |
Digital network echo cancellers
|
G.169 |
Automatic level control devices
|
G.171 |
[Withdrawn]
Transmission plan aspects of privately operated
networks |
G.172 |
Transmission plan aspects of international
conference calls
|
G.173 |
Transmission planning aspects of the speech
service in digital public land mobile networks
|
G.174 |
Transmission performance objectives for
terrestrial digital wireless systems using
portable terminals to access the PSTN
|
G.175 |
Transmission planning for private/public network
interconnection of voice traffic
|
G.176 |
Planning guidelines for the integration of ATM
technology into networks supporting voiceband
services |
G.177 |
Transmission planning for voiceband services
over hybrid Internet/PSTN connections
|
G.180 |
Characteristics of N + M type direct
transmission restoration systems for use on
digital and analogue sections, links or
equipment |
G.181 |
Characteristics of 1 + 1 type restoration
systems for use on digital transmission links
|
G.191 |
Software tools for speech and audio coding
standardization |
G.192 |
A common digital parallel interface for speech
standardisation activities
|
G.211 |
Make-up of a carrier link
|
G.212 |
Hypothetical reference circuits for analogue
systems |
G.213 |
Interconnection of systems in a main repeater
station |
G.214 |
Line stability of cable systems
|
G.215 |
Hypothetical reference circuit of 5000 km for
analogue systems
|
G.221 |
Overall recommendations relating to
carrier-transmission systems
|
G.222 |
Noise objectives for design of
carrier-transmission systems of 2500 km
|
G.223 |
Assumptions for the calculation of noise on
hypothetical reference circuits for telephony
|
G.224 |
Maximum permissible value for the absolute power
level (power referred to one milliwatt) of a
signalling pulse
This Recommendation was formerly also included
in Q series under number Q.16 |
G.225 |
Recommendations relating to the accuracy of
carrier frequencies
|
G.226 |
Noise on a real link
|
G.227 |
Conventional telephone signal
|
G.228 |
Measurement of circuit noise in cable systems
using a uniform-spectrum random noise loading
|
G.229 |
Unwanted modulation and phase jitter
|
G.230 |
Measuring methods for noise produced by
modulating equipment and through-connection
filters |
G.231 |
Arrangement of carrier equipment
|
G.232 |
12-channel terminal equipments
|
G.233 |
Recommendations concerning translating
equipments |
G.234 |
[Withdrawn] 8-channel
terminal equipments |
G.235 |
[Withdrawn] 16-channel
terminal equipments |
G.241 |
Pilots on groups, supergroups, etc.
|
G.242 |
Through-connection of groups, supergroups, etc.
|
G.243 |
Protection of pilots and additional measuring
frequencies at points where there is a
through-connection
|
G.311 |
[Withdrawn] General
characteristics of systems providing 12 carrier
telephone circuits on an open-wire pair |
G.312 |
[Withdrawn]
Intermediate repeaters for open-wire carrier
systems conforming to Recommendation G.311 |
G.313 |
[Withdrawn] Open-wire
lines for use with 12-channel carrier systems |
G.314 |
[Withdrawn] General
characteristics of systems providing eight
carrier telephone circuits on an open-wire pair
|
G.322 |
General characteristics recommended for systems
on symmetric pair cables
|
G.323 |
[Withdrawn] A typical
transistorized system on symmetric cable pairs |
G.324 |
[Withdrawn] General
characteristics for valve-type systems on
symmetric cable pairs |
G.325 |
General characteristics recommended for systems
providing 12 telephone carrier circuits on a
symmetric cable pair [(12 + 12) systems]
|
G.326 |
[Withdrawn] Typical
systems on symmetric cable pairs [(12 + 12)
systems] |
G.327 |
[Withdrawn] Valve-type
systems offering 12 carrier telephone circuits
on a symmetric cable pair [(12 + 12) systems] |
G.332 |
12 MHz systems on standardized 2.6/9.5 mm
coaxial cable pairs
|
G.333 |
60 MHz systems on standardized 2.6/9.5 mm
coaxial cable pairs
|
G.334 |
18 MHz systems on standardized 2.6/9.5 mm
coaxial cable pairs
|
G.337 |
[Withdrawn] General
characteristics of systems on 2.6/9.5 mm coaxial
cable pairs |
G.338 |
[Withdrawn] 4 MHz
valve-type systems on standardized 2.6/9.5 mm
coaxial cable pairs |
G.339 |
[Withdrawn] 12 MHz
valve-type systems on standardized 2.6/9.5 mm
coaxial cable pairs |
G.341 |
1.3 MHz systems on standardized 1.2/4.4 mm
coaxial cable pairs
|
G.343 |
4 MHz systems on standardized 1.2/4.4 mm coaxial
cable pairs |
G.344 |
6 MHz systems on standardized 1.2/4.4 mm coaxial
cable pairs |
G.345 |
12 MHz systems on standardized 1.2/4.4 mm
coaxial cable pairs
|
G.346 |
18 MHz systems on standardized 1.2/4.4 mm
coaxial cable pairs
|
G.352 |
Interconnection of coaxial carrier systems of
different designs
|
G.356 |
[Withdrawn] (120 + 120)
channel systems on a single coaxial pair |
G.361 |
[Withdrawn] Systems
providing three carrier telephone circuits on a
pair of open-wire lines |
G.371 |
[Withdrawn] FDM carrier
systems for submarine cable |
G.411 |
Use of radio-relay systems for international
telephone circuits
|
G.412 |
[Withdrawn] Terminal
equipments of radio-relay systems forming part
of a general telecommunication network |
G.421 |
Methods of interconnection
|
G.422 |
Interconnection at audio-frequencies
|
G.423 |
Interconnection at the baseband frequencies of
frequency-division multiplex radio-relay systems
|
G.431 |
Hypothetical reference circuits for
frequency-division multiplex radio-relay systems
|
G.433 |
[Withdrawn]
Hypothetical reference circuit for trans-horizon
radio-relay systems for telephony using
frequency-division multiplex |
G.434 |
[Withdrawn]
Hypothetical reference circuit for systems using
analogue transmission in the fixed-satellite
service |
G.441 |
Permissible circuit noise on frequency-division
multiplex radio-relay systems
|
G.442 |
Radio-relay system design objectives for noise
at the far end of a hypothetical reference
circuit with reference to telegraphy
transmission |
G.444 |
[Withdrawn] Allowable
noise power in the hypothetical reference
circuit of trans-horizon radio-relay systems for
telephony using frequency-division multiplex |
G.445 |
[Withdrawn] Allowable
noise power in the hypothetical reference
circuit for frequency-division multiplex
telephony in the fixed-satellite service |
G.451 |
Use of radio links in international telephone
circuits |
G.453 |
[Withdrawn] Improved
transmission system for HF radio-telephone
circuits |
G.464 |
[Withdrawn] Principles
of the devices used to achieve privacy in
radiotelephone conversations |
G.473 |
[Withdrawn]
Interconnection of a maritime mobile satellite
system with the international automatic switched
telephone service; transmission aspects
Withdrawn because it provided transmission
planning information that was obsolete and no
longer used
|
G.511 |
Test methodology for Group 3 facsimile
processing equipment in the Public Switched
Telephone Network
This Recommendation was renumbered as ITU-T Rec.
T.5 on 2002-02-15 without further modification
|
G.541 |
[Withdrawn]
Specification of factory lengths of loaded
telecommunication cable |
G.542 |
[Withdrawn]
Specification of loading coils for loaded
telecommunication cables |
G.543 |
[Withdrawn]
Specification for repeater sections of loaded
telecommunication cable |
G.544 |
[Withdrawn]
Specifications for terminal equipment and
intermediate repeater stations |
G.601 |
Terminology for cables
|
G.602 |
Reliability and availability of analogue cable
transmission systems and associated equipments
|
G.611 |
Characteristics of symmetric cable pairs for
analogue transmission
|
G.612 |
Characteristics of symmetric cable pairs
designed for the transmission of systems with
bit rates of the order of 6 to 34 Mbit/s
|
G.613 |
Characteristics of symmetric cable pairs usable
wholly for the transmission of digital systems
with a bit rate of up to 2 Mbits
|
G.614 |
Characteristics of symmetric pair star-quad
cables designed earlier for analogue
transmission systems and being used now for
digital system transmission at bit rates of 6 to
34 Mbit/s |
G.621 |
Characteristics of 0.7/2.9 mm coaxial cable
pairs |
G.622 |
Characteristics of 1.2/4.4 mm coaxial cable
pairs |
G.623 |
Characteristics of 2.6/9.5 mm coaxial cable
pairs |
G.631 |
Types of submarine cable to be used for systems
with line frequencies of less than about 45 MHz
|
G.640 |
Co-location longitudinally compatible interfaces
for free space optical systems
|
G.641 |
[Withdrawn] Waveguide
diameters |
G.650 |
Definition and test methods for the relevant
parameters of single-mode fibres
|
G.650.1 |
Definitions and test methods for linear,
deterministic attributes of single-mode fibre
and cable |
G.650.2 |
Definitions and test methods for statistical and
non-linear related attributes of single-mode
fibre and cable |
G.650.3 |
Test methods for installed single-mode fibre
cable sections |
G.651 |
Characteristics of a 50/125 µm multimode graded
index optical fibre cable
|
G.651.1 |
Characteristics of a 50/125 µm multimode graded
index optical fibre cable for the optical access
network |
G.652 |
Characteristics of a single-mode optical fibre
and cable |
G.653 |
Characteristics of a dispersion-shifted
single-mode optical fibre and cable
|
G.654 |
Characteristics of a cut-off shifted single-mode
optical fibre and cable
|
G.655 |
Characteristics of a non-zero dispersion-shifted
single-mode optical fibre and cable
|
G.656 |
Characteristics of a fibre and cable with
non-zero dispersion for wideband optical
transport |
G.657 |
Characteristics of a Bending Loss Insensitive
Single Mode Optical Fibre and Cable for the
Access Network |
G.661 |
Definition and test methods for the relevant
generic parameters of optical amplifier devices
and subsystems |
G.662 |
Generic characteristics of optical amplifier
devices and subsystems
|
G.663 |
Application related aspects of optical amplifier
devices and subsystems
|
G.664 |
Optical safety procedures and requirements for
optical transport systems
|
G.665 |
Generic characteristics of Raman amplifiers and
Raman amplified subsystems
|
G.666 |
Characteristics of PMD compensators and PMD
compensating receivers
|
G.667 |
Characteristics of Adaptive Chromatic Dispersion
Compensators |
G.671 |
Transmission characteristics of optical
components and subsystems
|
G.680 |
Physical transfer functions of optical networks
elements |
G.681 |
[Withdrawn] Functional
characteristics of interoffice and long-haul
line systems using optical amplifiers, including
optical multiplexing
|
G.691 |
Optical interfaces for single channel STM-64 and
other SDH systems with optical amplifiers
|
G.692 |
Optical interfaces for multichannel systems with
optical amplifiers
Covering note, 07.01.2000: Corrigendum 1
|
G.693 |
Optical interfaces for intra-office systems
|
G.694.1 |
Spectral grids for WDM applications: DWDM
frequency grid |
G.694.2 |
Spectral grids for WDM applications: CWDM
wavelength grid |
G.695 |
Optical interfaces for coarse wavelength
division multiplexing applications
|
G.696.1 |
Longitudinally compatible intra-domain DWDM
applications |
G.697 |
Optical monitoring for DWDM systems
|
G.698.1 |
Multichannel DWDM applications with single
channel optical interfaces
|
G.700 |
[Withdrawn] Framework
of the series G.700, G.800 and G.900
Recommendations |
G.701 |
Vocabulary of digital transmission and
multiplexing, and pulse code modulation (PCM)
terms |
G.702 |
Digital hierarchy bit rates
|
G.703 |
Physical/electrical characteristics of
hierarchical digital interfaces
|
G.704 |
Synchronous frame structures used at 1544, 6312,
2048, 8448 and 44 736 kbit/s hierarchical levels
|
G.705 |
Characteristics of plesiochronous digital
hierarchy (PDH) equipment functional blocks
|
G.706 |
Frame alignment and cyclic redundancy check (CRC)
procedures relating to basic frame structures
defined in Recommendation G.704
|
G.707 |
Network node interface for the synchronous
digital hierarchy (SDH)
Replaces 1993 versions of ITU-T G.707, G.708,
G.709.
|
G.708 |
Sub STM-0 network node interface for the
synchronous digital hierarchy (SDH)
|
G.709 |
Interfaces for the Optical Transport Network (OTN)
|
G.Imp709 |
Implementers' Guide
|
G.711 |
Pulse code modulation (PCM) of voice frequencies
Corresponding ANSI-C code is available in the
G.711 module of the ITU-T G.191 Software Tools
Library.
|
G.712 |
Transmission performance characteristics of
pulse code modulation channels
Replaces G.712, G.713, G.714, G.715 |
G.713 |
[Withdrawn] Performance
characteristics of PCM channels between 2-wire
interfaces at voice frequencies
The content of this Recommendation is now
covered by ITU-T G.712 |
G.714 |
[Withdrawn] Separate
performance characteristics for the encoding and
decoding sides of PCM channels applicable to
4-wire voice-frequency interfaces
The content of this Recommendation is now
covered by ITU-T G.712 |
G.715 |
[Withdrawn] Separate
performance characteristics for the encoding and
decoding side of PCM channels applicable to
2-wire interfaces
The content of this Recommendation is now
covered by ITU-T G.712 |
G.720 |
Characterization of low-rate digital voice coder
performance with non-voice signals
|
G.721 |
[Withdrawn] 32 kbit/s
adaptive differential pulse code modulation (ADPCM)
The content of this Recommendation is now
covered by ITU-T G.726 |
G.722 |
7 kHz audio-coding within 64 kbit/s
|
G.722.1 |
Low-complexity coding at 24 and 32 kbit/s for
hands-free operation in systems with low frame
loss |
G.722.2 |
Wideband coding of speech at around 16 kbit/s
using Adaptive Multi-Rate Wideband (AMR-WB)
|
G.Imp722.1 |
Implementors' Guide for G.722.1 Main Body and
Annex B: (Coding at 24 and 32 kbit/s for
hands-free operation in systems with low frame
loss) |
G.Imp722.2 |
Implementors' Guide for G.722.2: (Wideband
coding of speech at around 16 kbit/s using
Adaptive Multi-rate Wideband, AMR-WB)
|
G.723 |
[Withdrawn] Extensions
of Recommendation G.721 adaptive differential
pulse code modulation to 24 and 40 kbit/s for
digital circuit multiplication equipment
application
The content of 1988 edition of ITU-T G.723 is
now covered by ITU-T G.726 |
G.723.1 |
Dual rate speech coder for multimedia
communications transmitting at 5.3 and 6.3
kbit/s |
G.724 |
Characteristics of a 48-channel low bit rate
encoding primary multiplex operating at 1544
kbit/s |
G.725 |
System aspects for the use of the 7 kHz audio
codec within 64 kbit/s
|
G.726 |
40, 32, 24, 16 kbit/s Adaptive Differential
Pulse Code Modulation (ADPCM)
Corresponding ANSI-C code is available in the
G.726 module of the ITU-T G.191 Software Tools
Library |
G.727 |
5-, 4-, 3- and 2-bit/sample embedded adaptive
differential pulse code modulation (ADPCM)
|
G.728 |
Coding of speech at 16 kbit/s using low-delay
code excited linear prediction
|
G.Imp728 |
Implementors' Guide for ITU-T Recommendation
G.728 ("Coding of speech at 16 kbit/s using
low-delay code excited linear prediction")
|
G.729 |
Coding of speech at 8 kbit/s using
conjugate-structure algebraic-code-excited
linear prediction (CS-ACELP)
|
G.729.1 |
G.729 based Embedded Variable bit-rate coder: An
8-32 kbit/s scalable wideband coder bitstream
interoperable with G.729
|
G.Imp729 |
Implementers' Guide for G.729 Annexes B, F, G, I
and C+ (Coding of speech at 8 kbit/s using
CS-ACELP) |
G.731 |
Primary PCM multiplex equipment for voice
frequencies |
G.732 |
Characteristics of primary PCM multiplex
equipment operating at 2048 kbit/s
|
G.733 |
Characteristics of primary PCM multiplex
equipment operating at 1544 kbit/s
|
G.734 |
Characteristics of synchronous digital multiplex
equipment operating at 1544 kbit/s
|
G.735 |
Characteristics of primary PCM multiplex
equipment operating at 2048 kbit/s and offering
synchronous digital access at 384 kbit/s and/or
64 kbit/s |
G.736 |
Characteristics of a synchronous digital
multiplex equipment operating at 2048 kbit/s
|
G.737 |
Characteristics of an external access equipment
operating at 2048 kbit/s offering synchronous
digital access at 384 kbit/s and/or 64 kbit/s
|
G.738 |
Characteristics of primary PCM multiplex
equipment operating at 2048 kbit/s and offering
synchronous digital access at 320 kbit/s and/or
64 kbit/s |
G.739 |
Characteristics of an external access equipment
operating at 2048 kbit/s offering synchronous
digital access at 320 kbit/s and/or 64 kbit/s
|
G.741 |
General considerations on second order multiplex
equipments |
G.742 |
Second order digital multiplex equipment
operating at 8448 kbit/s and using positive
justification |
G.743 |
Second order digital multiplex equipment
operating at 6312 kbit/s and using positive
justification |
G.744 |
Second order PCM multiplex equipment operating
at 8448 kbit/s |
G.745 |
Second order digital multiplex equipment
operating at 8448 kbit/s and using
positive/zero/negative justification
|
G.746 |
Characteristics of second order PCM multiplex
equipment operating at 6312 kbit/s
|
G.747 |
Second order digital multiplex equipment
operating at 6312 kbit/s and multiplexing three
tributaries at 2048 kbit/s
|
G.751 |
Digital multiplex equipments operating at the
third order bit rate of 34 368 kbit/s and the
fourth order bit rate of 139 264 kbit/s and
using positive justification
|
G.752 |
Characteristics of digital multiplex equipments
based on a second order bit rate of 6312 kbit/s
and using positive justification
|
G.753 |
Third order digital multiplex equipment
operating at 34 368 kbit/s and using
positive/zero/negative justification
|
G.754 |
Fourth order digital multiplex equipment
operating at 139 264 kbit/s and using
positive/zero/negative justification
|
G.755 |
Digital multiplex equipment operating at 139 264
kbit/s and multiplexing three tributaries at 44
736 kbit/s |
G.761 |
General characteristics of a 60-channel
transcoder equipment
|
G.762 |
General characteristics of a 48-channel
transcoder equipment
|
G.763 |
Digital circuit multiplication equipment using
G.726 ADPCM and digital speech interpolation
This Recommendation includes 2 diskettes. The
first one contains A-Law and m-Law test vectors
for DCME verification. The second one contains
example transmit/receive SDLs. Covering note,
May 2000: Erratum
|
G.764 |
Voice packetization - Packetized voice protocols
|
G.765 |
Packet circuit multiplication equipment
|
G.766 |
Facsimile demodulation/remodulation for digital
circuit multiplication equipment
|
G.767 |
Digital circuit multiplication equipment using
16 kbit/s LD-CELP, digital speech interpolation
and facsimile demodulation/remodulation
|
G.768 |
Digital circuit multiplication equipment using 8
kbit/s CS-ACELP |
G.769 |
Circuit multiplication equipment optimized for
IP-based networks |
G.771 |
[Withdrawn]
Q-interfaces and associated protocols for
transmission equipment in the TMN |
G.772 |
Protected monitoring points provided on digital
transmission systems
|
G.773 |
Protocol suites for Q-interfaces for management
of transmission systems
|
G.Imp773 |
Implementors' Guide for ITU-T Recommendation
G.773 |
G.774 |
Synchronous digital hierarchy (SDH) - Management
information model for the network element view
|
G.774.01 |
Synchronous Digital Hierarchy (SDH) performance
monitoring for the network element view
|
G.774.1 |
Synchronous digital hierarchy (SDH) -
Bidirectional performance monitoring for the
network element view
|
G.774.2 |
Synchronous digital hierarchy (SDH) -
Configuration of the payload structure for the
network element view
|
G.774.02 |
Synchronous digital hierarchy (SDH)
configuration of the payload structure for the
network element view
|
G.774.03 |
Synchronous digital hierarchy (SDH) management
of multiplex-section protection for the network
element view |
G.774.3 |
Synchronous digital hierarchy (SDH) - Management
of multiplex-section protection for the network
element view |
G.774.4 |
Synchronous digital hierarchy (SDH) - Management
of the subnetwork connection protection for the
network element view
|
G.774.04 |
Synchronous digital hierarchy (SDH) management
of the subnetwork connection protection for the
network element view
|
G.774.05 |
Synchronous Digital Hierarchy (SDH) management
of connection supervision functionality
(HCS/LCS) for the network element view
|
G.774.5 |
Synchronous digital hierarchy (SDH) - Management
of connection supervision functionality
(HCS/LCS) for the network element view
|
G.774.6 |
Synchronous digital hierarchy (SDH) -
Unidirectional performance monitoring for the
network element view
|
G.774.7 |
Synchronous digital hierarchy (SDH) - Management
of lower order path trace and interface
labelling for the network element view
|
G.774.8 |
Synchronous digital hierarchy (SDH) - Management
of radio-relay systems for the network element
view |
G.774.9 |
Synchronous digital hierarchy (SDH) -
Configuration of linear multiplex-section
protection for the network element view
|
G.774.10 |
Synchronous Digital Hierarchy (SDH) Multiplex
Section (MS) shared protection ring management
for the network element view
|
G.Imp774 |
Implementors' guide synchronous digital
hierarchy (SDH) G.774 series of recommendations
|
G.775 |
Loss of Signal (LOS), Alarm Indication Signal (AIS)
and Remote Defect Indication (RDI) defect
detection and clearance criteria for PDH signals
|
G.776.1 |
Managed objects for signal processing network
elements
This Recommendation includes one diskette
containing the information model of Signal
Processing Network Elements (SPNE). |
G.776.3 |
ADPCM DCME configuration map report
|
G.Imp776.1 |
Implementor's Guide for Recommendation G.776.1
|
G.780 |
Terms and definitions for synchronous digital
hierarchy (SDH) networks
|
G.781W |
[Withdrawn] Structure
of Recommendations on equipment for the
synchronous digital hierarchy (SDH)
Merged with ITU-T Rec. G.783 in 1997
|
G.781 |
Synchronization layer functions
|
G.782 |
[Withdrawn] Types and
general characteristics of synchronous digital
hierarchy (SDH) equipment
Merged with ITU-T G.783 in 1997 |
G.783 |
Characteristics of synchronous digital hierarchy
(SDH) equipment functional blocks
|
G.784 |
Synchronous digital hierarchy (SDH) management
|
G.785 |
Characteristics of a flexible multiplexer in a
synchronous digital hierarchy environment
|
G.791 |
General considerations on transmultiplexing
equipments |
G.792 |
Characteristics common to all transmultiplexing
equipments |
G.793 |
Characteristics of 60-channel transmultiplexing
equipments |
G.794 |
Characteristics of 24-channel transmultiplexing
equipments |
G.795 |
Characteristics of codecs for FDM assemblies
|
G.796 |
Characteristics of a 64 kbit/s cross-connect
equipment with 2048 kbit/s access ports
|
G.797 |
Characteristics of a flexible multiplexer in a
plesiochronous digital hierarchy environment
|
G.798 |
Characteristics of optical transport network
hierarchy equipment functional blocks
|
G.Imp798 |
Implementers' Guide
|
G.799.1 |
Functionality and interface specifications for
GSTN transport network equipment for
interconnecting GSTN and IP networks
|
G.801 |
Digital transmission models
|
G.802 |
Interworking between networks based on different
digital hierarchies and speech encoding laws
|
G.803 |
Architecture of transport networks based on the
synchronous digital hierarchy (SDH)
|
G.804 |
ATM cell mapping into plesiochronous digital
hierarchy (PDH) |
G.805 |
Generic functional architecture of transport
networks |
G.806 |
Characteristics of transport equipment -
Description methodology and generic
functionality |
G.807 |
[Withdrawn]
Requirements for automatic switched transport
networks (ASTN)
Withdrawn on 30 September 2006 after its
material was merged into ITU-T Rec.
G.8080/Y.1304 (06/2006) |
G.Imp807 |
Implementers' Guide
|
G.808.1 |
Generic protection switching - Linear trail and
subnetwork protection
|
G.Imp808.1 |
Implementers' Guide
|
G.809 |
Functional architecture of connectionless layer
networks |
G.810 |
Definitions and terminology for synchronization
networks |
G.811 |
Timing characteristics of primary reference
clocks |
G.812 |
Timing requirements of slave clocks suitable for
use as node clocks in synchronization networks
|
G.813 |
Timing characteristics of SDH equipment slave
clocks (SEC) |
G.820 |
Relationships among ISDN, IP-based network and
physical layer performance Recommendations
Formerly ITU-T Rec. I.351/Y.801/Y.1501
|
G.821 |
Error performance of an international digital
connection operating at a bit rate below the
primary rate and forming part of an Integrated
Services Digital Network
|
G.822 |
Controlled slip rate objectives on an
international digital connection
|
G.823 |
The control of jitter and wander within digital
networks which are based on the 2048 kbit/s
hierarchy |
G.824 |
The control of jitter and wander within digital
networks which are based on the 1544 kbit/s
hierarchy |
G.825 |
The control of jitter and wander within digital
networks which are based on the synchronous
digital hierarchy (SDH)
|
G.826 |
End-to-end error performance parameters and
objectives for international, constant bit-rate
digital paths and connections
|
G.827 |
Availability performance parameters and
objectives for end-to-end international constant
bit-rate digital paths
|
G.827.1 |
[Withdrawn]
Availability performance objectives for
end-to-end international constant bit-rate
digital paths at or above the primary rate
|
G.828 |
Error performance parameters and objectives for
international, constant bit-rate synchronous
digital paths |
G.829 |
Error performance events for SDH multiplex and
regenerator sections
|
G.831 |
Management capabilities of transport networks
based on the synchronous digital hierarchy (SDH)
|
G.832 |
Transport of SDH elements on PDH networks -
Frame and multiplexing structures
|
G.841 |
Types and characteristics of SDH network
protection architectures
|
G.842 |
Interworking of SDH network protection
architectures |
G.851.1 |
Management of the transport network -
Application of the RM-ODP framework
|
G.852.1 |
Enterprise viewpoint for simple subnetwork
connection management
|
G.852.2 |
Enterprise viewpoint description of transport
network resource model
|
G.852.3 |
Enterprise viewpoint for topology management
|
G.852.6 |
Enterprise viewpoint for trail management
|
G.852.8 |
Enterprise viewpoint for pre-provisioned
adaptation management
|
G.852.10 |
Enterprise viewpoint for pre-provisioned link
connection management
|
G.852.12 |
Enterprise viewpoint for pre-provisioned link
management |
G.852.16 |
Enterprise viewpoint for pre-provisioned route
discovery |
G.853.1 |
Common elements of the information viewpoint for
the management of a transport network
|
G.853.2 |
Subnetwork connection management information
viewpoint |
G.853.3 |
Information viewpoint for topology management
|
G.853.6 |
Information viewpoint for trail management
|
G.853.8 |
Information viewpoint for pre-provisioned
adaptation management
|
G.853.10 |
Information viewpoint for pre-provisioned link
connection management
|
G.853.12 |
Information viewpoint for pre-provisioned link
management |
G.853.16 |
Information viewpoint for pre-provisioned route
discovery |
G.854.1 |
Computational interfaces for basic transport
network model |
G.854.3 |
Computational viewpoint for topology management
|
G.854.6 |
Computational viewpoint for trail management
|
G.854.8 |
Computational viewpoint for pre-provisioned
adaptation management
|
G.854.10 |
Computational viewpoint for pre-provisioned link
connection management
|
G.854.12 |
Computational viewpoint for pre-provisioned link
management |
G.854.16 |
Computational viewpoint for pre-provisioned
route discovery |
G.855.1 |
GDMO engineering viewpoint for the generic
network level model
|
G.861 |
Principles and guidelines for the integration of
satellite and radio systems in SDH transport
networks |
G.870 |
Terms and definitions for Optical Transport
Networks (OTN) |
G.871 |
Framework for optical transport network
Recommendations |
G.Imp871 |
Implementers' Guide
|
G.872 |
Architecture of optical transport networks
|
G.Imp872 |
Implementers' Guide
|
G.873.1 |
Optical Transport Network (OTN): Linear
protection |
G.Imp873.1 |
Implementers' Guide
|
G.874 |
Management aspects of the optical transport
network element |
G.874.1 |
Optical transport network (OTN):
Protocol-neutral management information model
for the network element view
|
G.Imp874 |
Implementers' Guide
|
G.Imp874.1 |
Implementors' Guide
|
G.901 |
General considerations on digital sections and
digital line systems
|
G.902 |
Framework Recommendation on functional access
networks (AN) - Architecture and functions,
access types, management and service node
aspects |
G.911 |
Parameters and calculation methodologies for
reliability and availability of fibre optic
systems |
G.921 |
Digital sections based on the 2048 kbit/s
hierarchy |
G.931 |
[Withdrawn] Digital
line sections at 3152 kbit/s
|
G.941 |
Digital line systems provided by FDM
transmission bearers
|
G.950 |
General considerations on digital line systems
|
G.951 |
Digital line systems based on the 1544 kbit/s
hierarchy on symmetric pair cables
|
G.952 |
Digital line systems based on the 2048 kbit/s
hierarchy on symmetric pair cables
|
G.953 |
Digital line systems based on the 1544 kbit/s
hierarchy on coaxial pair cables
|
G.954 |
Digital line systems based on the 2048 kbit/s
hierarchy on coaxial pair cables
|
G.955 |
Digital line systems based on the 1544 kbit/s
and the 2048 kbit/s hierarchy on optical fibre
cables |
G.956 |
[Withdrawn] Digital
line systems based on the 2048 kbit/s hierarchy
on optical fibre cables
The content of this Recommendation is now
covered by ITU-T G.955 |
G.957 |
Optical interfaces for equipments and systems
relating to the synchronous digital hierarchy
|
G.958 |
[Withdrawn] Digital
line systems based on the synchronous digital
hierarchy for use on optical fibre cables
|
G.959.1 |
Optical transport network physical layer
interfaces |
G.960 |
Access digital section for ISDN basic rate
access |
G.961 |
Digital transmission system on metallic local
lines for ISDN basic rate access
Covering note, 1st August 2000: Corrigendum 1
|
G.962 |
Access digital section for ISDN primary rate at
2048 kbit/s |
G.963 |
Access digital section for ISDN primary rate at
1544 kbit/s |
G.964 |
V-Interfaces at the digital local exchange (LE)
- V5.1 interface (based on 2048 kbit/s) for the
support of access network (AN)
|
G.965 |
V-interfaces at the digital local exchange (LE)
- V5.2 interface (based on 2048 kbit/s) for the
support of access network (AN)
|
G.966 |
Access digital section for B-ISDN
|
G.967.1 |
V-interfaces at the service node (SN) : VB5.1
reference point specification
This Recommendation includes one diskette
containing the SDL process diagrams
corresponding to the VB5.1 reference point.
|
G.967.2 |
V-interfaces at the service node (SN) : VB5.2
reference point specification
This Recommendation includes one diskette
containing the SDL process diagrams
corresponding to the VB5.2 reference point.
|
G.967.3 |
V-interfaces at the service node (SN) : Protocol
implementation conformance statements for
interfaces at VB5 reference points
|
G.971 |
General features of optical fibre submarine
cable systems |
G.972 |
Definition of terms relevant to optical fibre
submarine cable systems
|
G.973 |
Characteristics of repeaterless optical fibre
submarine cable systems
|
G.974 |
Characteristics of regenerative optical fibre
submarine cable systems
|
G.975 |
Forward error correction for submarine systems
|
G.975.1 |
Forward error correction for high bit rate DWDM
submarine systems
|
G.976 |
Test methods applicable to optical fibre
submarine cable systems
|
G.977 |
Characteristics of optically amplified optical
fibre submarine cable systems
|
G.978 |
Characteristics of optical fibre submarine
cables |
G.981 |
PDH optical line systems for the local network
|
G.982 |
Optical access networks to support services up
to the ISDN primary rate or equivalent bit rates
|
G.983.1 |
Broadband optical access systems based on
Passive Optical Networks (PON)
|
G.983.2 |
ONT management and control interface
specification for B-PON
|
G.983.3 |
A broadband optical access system with increased
service capability by wavelength allocation
|
G.983.4 |
A broadband optical access system with increased
service capability using dynamic bandwidth
assignment |
G.983.5 |
A broadband optical access system with enhanced
survivability |
G.983.6 |
[Withdrawn] ONT
management and control interface specifications
for B-PON system with protection features
The material of ITU-T Recs G.983.6, G.983.7,
G.983.8, G.983.9 and G.983.10 having been
incorporated in ITU-T Rec. G.983.2 (2005)
|
G.983.7 |
[Withdrawn] ONT
management and control interface specification
for dynamic bandwidth assignment (DBA) B-PON
system
The material of ITU-T Recs G.983.6, G.983.7,
G.983.8, G.983.9 and G.983.10 having been
incorporated in ITU-T Rec. G.983.2 (2005)
|
G.983.8 |
[Withdrawn] B-PON OMCI
support for IP, ISDN, video, VLAN tagging, VC
cross-connections and other select functions
The material of ITU-T Recs G.983.6, G.983.7,
G.983.8, G.983.9 and G.983.10 having been
incorporated in ITU-T Rec. G.983.2 (2005)
|
G.983.9 |
[Withdrawn] B-PON ONT
management and control interface (OMCI) support
for wireless Local Area Network interfaces
The material of ITU-T Recs G.983.6, G.983.7,
G.983.8, G.983.9 and G.983.10 having been
incorporated in ITU-T Rec. G.983.2 (2005)
|
G.983.10 |
[Withdrawn] B-PON ONT
management and control interface (OMCI) support
for Digital Subscriber Line interfaces
The material of ITU-T Recs G.983.6, G.983.7,
G.983.8, G.983.9 and G.983.10 having been
incorporated in ITU-T Rec. G.983.2 (2005)
|
G.Imp983.2 |
Implementers’ Guide for ITU-T Rec. G.983.2
(07/2005) |
G.984.1 |
Gigabit-capable Passive Optical Networks (GPON):
General characteristics
|
G.984.2 |
Gigabit-capable Passive Optical Networks (GPON):
Physical Media Dependent (PMD) layer
specification |
G.984.3 |
Gigabit-capable Passive Optical Networks (G-PON):
Transmission convergence layer specification
|
G.984.4 |
Gigabit-capable Passive Optical Networks (G-PON):
ONT management and control interface
specification |
G.Imp984.3 |
Implementers’ Guide for ITU-T Rec. G.984.3
(02/2004) |
G.985 |
100 Mbit/s point-to-point Ethernet based optical
access system |
G.989.1 |
[Renumbered] Phoneline
networking transceivers - Foundation
This Recommendation was renumbered as ITU-T Rec.
G.9951 on 2005-05-27 without further
modification |
G.989.2 |
Phoneline networking transceivers - Payload
format and link layer requirements
This Recommendation was renumbered as ITU-T Rec.
G.9952 on 2005-05-27 without further
modification |
G.989.3 |
Phoneline networking transceivers - Isolation
function
This Recommendation was renumbered as ITU-T Rec.
G.9953 on 2005-05-27 without further
modification |
G.991.1 |
High bit rate Digital Subscriber Line (HDSL)
transceivers |
G.991.2 |
Single-pair high-speed digital subscriber line (SHDSL)
transceivers |
G.992.1 |
Asymmetric digital subscriber line (ADSL)
transceivers |
G.992.2 |
Splitterless asymmetric digital subscriber line
(ADSL) transceivers
|
G.992.3 |
Asymmetric digital subscriber line transceivers
2 (ADSL2) |
G.992.4 |
Splitterless asymmetric digital subscriber line
transceivers 2 (splitterless ADSL2) |
G.992.5 |
Asymmetric Digital Subscriber Line (ADSL)
transceivers - Extended bandwidth ADSL2
(ADSL2plus) |
G.993.1 |
Very high speed digital subscriber line
transceivers |
G.993.2 |
Very high speed digital subscriber line
transceivers 2 (VDSL2)
|
G.994.1 |
Handshake procedures for digital subscriber line
(DSL) transceivers
|
G.995.1 |
Overview of digital subscriber line (DSL)
Recommendations |
G.996.1 |
Test procedures for digital subscriber line
(DSL) transceivers
|
G.997.1 |
Physical layer management for digital subscriber
line (DSL) transceivers
|
G.998.1 |
ATM-based multi-pair bonding
|
G.998.2 |
Ethernet-based multi-pair bonding
|
G.998.3 |
Multi-pair bonding using time-division inverse
multiplexing |
G.1000 |
Communications Quality of Service: A framework
and definitions |
G.1010 |
End-user multimedia QoS categories |
G.1020 |
Performance parameter definitions for quality of
speech and other voiceband applications
utilizing IP networks
|
G.1030 |
Estimating end-to-end performance in IP networks
for data applications
|
G.1040 |
Network contribution to transaction time
|
G.1050 |
Network model for evaluating multimedia
transmission performance over Internet Protocol
|
G.1070 |
Opinion model for video-telephony applications
|
G.7041 |
Generic framing procedure (GFP)
|
G.7042 |
Link capacity adjustment scheme (LCAS) for
virtual concatenated signals
|
G.7043 |
Virtual concatenation of plesiochronous digital
hierarchy (PDH) signals
|
G.7710 |
Common equipment management function
requirements |
G.7712 |
Architecture and specification of data
communication network
|
G.7713 |
Distributed Call and Connection Management (DCM)
|
G.7713.1 |
Distributed call and connection management (DCM)
based on PNNI |
G.7713.2 |
Distributed Call and Connection Management:
Signalling mechanism using GMPLS RSVP-TE
|
G.7713.3 |
Distributed Call and Connection Management:
Signalling mechanism using GMPLS CR-LDP
|
G.Imp7713 |
Implementers' Guide
|
G.Imp7713.1 |
Implementers' Guide
|
G.Imp7713.2 |
Implementers' Guide
|
G.Imp7713.3 |
Implementers' Guide
|
G.7714 |
Generalized automatic discovery for transport
entities |
G.7714.1 |
Protocol for automatic discovery in SDH and OTN
networks |
G.Imp7714.1 |
Implementers' Guide
|
G.7715 |
Architecture and requirements for routing in the
automatically switched optical networks
|
G.7715.1 |
ASON routing architecture and requirements for
link state protocols
|
G.7715.2 |
ASON routing architecture and requirements for
remote route query
|
G.Imp7715 |
Implementers' Guide
|
G.Imp7715.1 |
Implementers' Guide
|
G.Imp7715.2 |
Implementers’ Guide for ITU-T Rec.
G.7715.2/Y.1706.2 (02/2007) - ASON routing
architecture and requirements for remote route
query |
G.7718 |
Framework for ASON management
|
G.7718.1 |
Protocol-neutral management information model
for the control plane view
|
G.8001 |
Terms and definitions for Ethernet frames over
Transport (EoT) |
G.8010 |
Architecture of Ethernet layer networks
|
G.Imp8010 |
Implementers’ Guide for ITU-T Rec. G.8010/Y.1306
(02/2004) - Architecture of Ethernet layer
networks |
G.8011 |
Ethernet over Transport - Ethernet services
framework |
G.8011.1 |
Ethernet private line service
|
G.8011.2 |
Ethernet virtual private line service
|
G.Imp8011 |
Implementers’ Guide for ITU-T Rec. G.8011/Y.1307
(08/2004) - Ethernet over Transport - Ethernet
services framework
|
G.Imp8011.1 |
Implementers’ Guide for ITU-T Rec.
G.8011.1/Y.1307.1 (08/2004) - Ethernet private
line service |
G.Imp8011.2 |
Implementers’ Guide for ITU-T Rec.
G.8011.2/Y.1307.2 (09/2005) - Ethernet virtual
private line service
|
G.8012 |
Ethernet UNI and Ethernet NNI
|
G.Imp8012 |
Implementers’ Guide for ITU-T Rec. G.8012/Y.1308
(08/2004) - Ethernet UNI and Ethernet NNI
|
G.8021 |
Characteristics of Ethernet transport network
equipment functional blocks
|
G.8031 |
Ethernet Protection Switching
|
G.8040 |
GFP frame mapping into Plesiochronous Digital
Hierarchy (PDH) |
G.8080 |
Architecture for the automatically switched
optical network (ASON)
|
G.Imp8080 |
Implementers' Guide
|
G.8081 |
Terms and definitions for Automatically Switched
Optical Networks (ASON)
|
G.8101 |
Terms and Definitions for Transport MPLS
|
G.8110 |
MPLS layer network architecture
|
G.8110.1 |
Architecture of Transport MPLS (T-MPLS) layer
network |
G.8112 |
Interfaces for the Transport MPLS (T-MPLS)
hierarchy |
G.8121 |
Characteristics of Transport MPLS (T-MPLS)
equipment functional blocks
|
G.8131 |
Linear protection switching for Transport MPLS
(T-MPLS) networks
|
G.8201 |
Error performance parameters and objectives for
multi-operator international paths within the
Optical Transport Network (OTN)
|
G.8251 |
The control of jitter and wander within the
optical transport network (OTN)
|
G.8261 |
Timing and synchronization aspects of packet
networks |
G.8262 |
Timing characteristics of synchronous ethernet
equipment slave clock (EEC)
|
G.8601 |
Architecture of service management in
multi-bearer, multi-carrier environment
|
G.9951 |
Phoneline networking transceivers - Foundation
This text was first approved and published as
ITU-T Rec. G.989.1 and then renumbered as G.9951
on 2005-05-27 without further modification
|
G.9952 |
Phoneline networking transceivers - Payload
format and link layer requirements
This text was first approved and published as
ITU-T Rec. G.989.2 and then renumbered as G.9952
on 2005-05-27 without further modification
|
G.9953 |
Phoneline networking transceivers - Isolation
function
This text was first approved and published as
ITU-T Rec. G.989.3 and then renumbered as G.9953
on 2005-05-27 without further modification
|
G.9954 |
Phoneline networking transceivers - Enhanced
physical, media access, and link layer
specifications |
G.100SerSup29 |
Planning of mixed analogue-digital circuits
(chains, connections)
|
G.100SerSup31 |
Principles of determining an impedance strategy
for the local network
|
G.100SerSup32 |
Transmission aspects of digital mobile radio
systems |
G.Sup1 |
[Withdrawn] Calculation
of the stability of international connections
established in accordance with the transmission
and switching plan
|
G.Sup2 |
[Withdrawn] Talker echo
on international connections
|
G.Sup3 |
[Withdrawn] Evaluation
of echo control devices
|
G.Sup4 |
Certain methods of avoiding the transmission of
excessive noise between interconnected systems
Green Book Volume III.2, page 572 |
G.Sup5 |
Measurement of the load of telephone circuits
under field conditions
Red Book Fascicle III.2, page 295 |
G.Sup6 |
[Withdrawn] Example
showing how the total value of line noise
specified for the hypothetical reference circuit
on open-wire lines might be broken down into its
various components
Green Book Volume III.2, page 589 |
G.Sup7 |
Loss-frequency response of channel-translating
equipment used in some countries for
international circuits
Green Book Volume III.2, page 590 |
G.Sup8 |
Method proposed by the Belgian telephone
administration for interconnection between
coaxial and symmetric pair systems
Green Book Volume III.2, page 591 |
G.Sup9 |
[Withdrawn] Roll effect
in coaxial pair systems
Green Book Volume III.2, page 592 |
G.Sup10 |
[Withdrawn] Application
of Recommendation B.4 concerning the use of
decibel |
G.Sup11 |
[Withdrawn] Data on
cable ships and submersible equipments of
various countries
This Supplement was withdrawn because its was no
longer relevant |
G.Sup13 |
[Withdrawn] Noise at
the terminals of the battery supply
Orange Book Fascicle III.3, page 664
|
G.Sup14 |
[Withdrawn] Methods for
measuring regularity return less
|
G.Sup15 |
[Withdrawn]
Almost-differential quasi-ternary code (ADQ
code)
This Supplement was withdrawn because its was
technically obsolete |
G.Sup17 |
Group-delay distortion performance of terminal
equipment
Red Book Fascicle III.2, page 311 |
G.Sup18 |
[Withdrawn] Information
on submarine cables used in deep water
Red Book Fascicle III.2, page 313 |
G.Sup19 |
Digital crosstalk measurement (method used by
the Administrations of France, the Netherlands
and Spain)
Red Book Fascicle III.2, page 326 |
G.Sup20 |
[Withdrawn] Possible
combinations of basic transmission impairments
in hypothetical reference connections
|
G.Sup21 |
[Withdrawn] The use of
quantizing distortion units in the planning of
international connections
|
G.Sup22 |
Mathematical models of multiplex signals
Red Book Fascicle III.2, page 326 |
G.Sup23 |
[Withdrawn] Explanatory
notes for the information of designers of a
maritime mobile satellite system
|
G.Sup24 |
[Withdrawn]
Consideration concerning quantizing distortion
units of some digital devices that process
encoded signals |
G.Sup26 |
Estimating the signal load margin of FDM
wideband amplifier equipment and transmission
systems
Red Book Fascicle III.2, page 344 |
G.Sup27 |
Interference from external sources
This Supplement is also published as G.500
series supplement in Red Book fascicle III.2
|
G.Sup28 |
Application of transmultiplexers, FDM codecs,
data-in-voice (DIV) systems and data-over-voice
(DOV) systems during the transition from an
analogue to a digital network
Red Book Fascicle III.3, page 397 |
G.Sup31 |
[Withdrawn] Principles
of determining an impedance strategy for the
local network |
G.Sup32 |
Transmission aspects of digital mobile radio
systems |
G.Sup33 |
[Withdrawn] Examples of
fibre design guidelines (diagrams used in Japan
and in the United Kingdom)
This Supplement was withdrawn because its was
technically obsolete |
G.Sup34 |
Temperature in underground containers for the
installation of repeaters
|
G.Sup35 |
Guidelines concerning the measurement of wander
|
G.Sup36 |
Jitter and wander accumulation in digital
networks |
G.Sup37 |
ITU-T Recommendation G.763 digital circuit
multiplication equipment (DCME) tutorial and
dimensioning |
G.Sup38 |
Variable bit rate calculations for the ITU-T
Recommendation G.767 Digital Circuit
Multiplication Equipment (DCME)
|
G.Sup39 |
Optical system design and engineering
considerations |
G.Sup40 |
Optical fibre and cable Recommendations and
standards guideline
|
G.Sup41 |
Design guidelines for optical fibre submarine
cable systems |
G.Sup43 |
Transport of IEEE 10G Base-R in Optical
Transport Networks (OTN)
|
G.Sup44 |
Test plan to verify B-PON Interoperability
|