| Q.1 |
Signal receivers for manual working
|
| Q.2 |
Signal receivers for automatic and semi-automatic working, used
for manual working |
| Q.4 |
Automatic switching functions for use in national networks
|
| Q.5 |
Advantages of semi-automatic service in the international
telephone service |
| Q.6 |
Advantages of international automatic working
|
| Q.7 |
Signalling systems to be used for international automatic and
semi-automatic telephone working
|
| Q.8 |
Signalling systems to be used for international manual and
automatic working on analogue leased circuits
|
| Q.9 |
Vocabulary of switching and signalling terms
|
| Q.10 |
[Withdrawn] Definitions relating to
national and international numbering plans
Q.10 was an extract of ITU-T E.160. E.160 was later replaced by
ITU-T E.164 |
| Q.11bis |
[Withdrawn] Numbering plan for the ISDN
era
Q.11 bis was an alias name of ITU-T E.164. Only this alias name
was suppressed. ITU-T E.164 remains valid |
| Q.11ter |
[Withdrawn] Timetable for coordinated
implementation of the full capability of the numbering plan for
the ISDN era (Recommendation E.164)
Q.11 ter was an alias name of ITU-T E.165. Only this alias name
was suppressed. ITU-T E.165 remains valid |
| Q.12 |
Overflow - alternative routing - rerouting - automatic repeat
attempt |
| Q.13 |
[Withdrawn] International telephone
routing plan
Q.13 was an alias name of ITU-T E.171. Only this alias name was
suppressed. ITU-T E.171 remains valid |
| Q.14 |
Means
to control the number of satellite links in an international
telephone connection |
| Q.15 |
[Withdrawn] Nominal mean power during
the busy hour
Q.15 was an extract of ITU-T G.223. ITU-T G.223 remains valid
|
| Q.16 |
[Withdrawn] Maximum permissible value
for the absolute power level of a signalling pulse
Q.16 was an alias name of ITU-T G.224. Only this alias name was
suppressed. ITU-T G.224 remains valid |
| Q.20 |
Comparative advantages of "in-band" and "out-band" systems
|
| Q.21 |
Systems recommended for out-band signalling
|
| Q.22 |
Frequencies to be used for in-band signalling
|
| Q.23 |
Technical features of push-button telephone sets
|
| Q.24 |
Multifrequency push-button signal reception
|
| Q.25 |
Splitting arrangements and signal recognition times in "in-band"
signalling systems |
| Q.26 |
Direct access to the international network from the national
network |
| Q.27 |
Transmission of the answer signal
|
| Q.28 |
Determination of the moment of the called subscriber's answer in
the automatic service |
| Q.29 |
Causes of noise and ways of reducing noise in telephone
exchanges |
| Q.30 |
Improving the reliability of contacts in speech circuits
|
| Q.31 |
Noise
in a national 4-wire automatic exchange
|
| Q.32 |
Reduction of the risk of instability by switching means
|
| Q.33 |
Protection against the effects of faulty transmission on groups
of circuits |
| Q.35 |
Technical characteristics of tones for the telephone service
This Recommendation is published with the double number E.180
and Q.35. For more details see E.180. |
| Q.36 |
[Withdrawn] Customer recognition of
foreign tones
Q.36 was an alias name of ITU-T E.181. Only this alias name was
suppressed. ITU-T E.181 remains valid |
| Q.40 |
[Withdrawn] The transmission plan
Deleted Q.40 was an extract of ITU-T G.101. ITU-T G.101 remains
valid
|
| Q.41 |
[Withdrawn] Mean one-way propagation
time
Deleted Q.41 was an extract of ITU-T G.114. ITU-T G.114 remains
valid
|
| Q.42 |
[Withdrawn] Stability and echo (echo
suppressors)
Q.42 was an alias name of ITU-T G.131. Only this alias name was
suppressed. ITU-T G.131 remains valid |
| Q.43 |
[Withdrawn] Transmission losses,
relative levels
Q.43 was an extract of ITU-T G.101. ITU-T G.101 remains valid
|
| Q.44 |
Attenuation distortion |
| Q.45 |
Transmission characteristics of an analogue international
exchange |
| Q.45bis |
Transmission characteristics of an analogue international
exchange |
| Q.48 |
Demand assignment signalling systems
|
| Q.49 |
[Withdrawn] CCITT automatic
transmission measuring and signalling testing equipment ATME No.
2
Q.49 was an alias name of ITU-T O.22. Only this alias name was
suppressed. ITU-T O.22 remains valid |
| Q.50 |
Signalling between Circuit Multiplication Equipment (CME) and
International Switching Centres (ISC)
|
| Q.50.1 |
Signalling between International Switching Centres (ISC) and
Digital Circuit Multiplication Equipment (DCME) including the
control of compression/decompression
|
| Q.50.2 |
Signalling between International Switching Centres (ISC) and
Digital Circuit Multiplication Equipment (DCME) including the
control of compression/decompression over an IP network
|
| Q.52 |
Signalling between international switching centres and
stand-alone echo control devices
|
| Q.55 |
Signalling between signal processing network equipment (SPNE)
and international switching centres (ISC)
|
| Q.56 |
Signalling between signal processing network equipment (SPNE)
and international switching centres (ISC) over an IP network
|
| Q.65 |
The
unified functional methodology for the characterization of
services and network capabilities including alternative object
oriented techniques |
| Q.68 |
Overview of methodology for developing management services
|
| Q.71 |
ISDN
circuit mode switched bearer services
|
| Q.72 |
Stage
2 description for packet mode services
|
| Q.76 |
Service procedures for Universal Personal Telecommunication -
Functional modelling and information flows
|
| Q.80 |
Introduction to stage 2 service descriptions for supplementary
services |
| Q.81.1 |
Direct dialling-in |
| Q.81.2 |
Stage
2 description for number identification supplementary services :
Multiple subscriber number
Published with ITU-T Q.81.8. |
| Q.81.3 |
Stage
2 description for number identification supplementary services :
Calling line identification presentation (CLIP) and calling line
identification restriction (CLIR)
Published with ITU-T Q.81.5. |
| Q.81.5 |
Stage
2 description for number identification supplementary services :
Connected line identification, presentation and restriction (COLP)
and (COLR)
Published with ITU-T Q.81.3. |
| Q.81.7 |
Stage
2 description for number identification supplementary services :
Malicious call identification (MCID)
This subject was only recognised and is for further study
|
| Q.81.8 |
Stage
2 description for number identification supplementary services :
Sub-addressing (SUB)
Published with ITU-T Q.81.2. |
| Q.82.1 |
Stage
2 description for call offering supplementary services : Call
transfer
Empty Recommendation. This subject was only recognised and is
for further study. |
| Q.82.2 |
Stage
2 description for call offering supplementary services : Call
forwarding
Published with ITU-T Q.82.3. |
| Q.82.3 |
Stage
2 description for call offering supplementary services : Call
deflection
Published with ITU-T Q.82.2. |
| Q.82.4 |
Line
hunting |
| Q.82.7 |
Explicit call transfer |
| Q.83.1 |
Stage
2 description for call completion supplementary services : Call
waiting (CW)
Published with ITU-T Q.83.4. |
| Q.83.2 |
Call
hold |
| Q.83.3 |
Stage
2 description for call completion supplementary services :
Completion of call to busy subscriber
Empty Recommendation. This service has only been identified and
requires further study. |
| Q.83.4 |
Stage
2 description for call completion supplementary services :
Terminal portability
Published with ITU-T Q.83.1. |
| Q.84.1 |
Conference calling (CONF) |
| Q.84.2 |
Three-party service |
| Q.85.1 |
Stage
2 description for community of interest supplementary services :
Closed user group
Published with ITU-T Q.85.3. |
| Q.85.3 |
Stage
2 description for community of interest supplementary services :
Multi-level precedence and preemption (MLPP)
Published with ITU-T Q.85.1. |
| Q.85.6 |
Global Virtual Network Service (GVNS)
|
| Q.86.1 |
Stage
2 description for charging supplementary services : Credit card
call
Empty Recommendation. This service has only been identified and
requires further study. |
| Q.86.2 |
Advice of charge (AOC) |
| Q.86.3 |
Reverse charging (REV) |
| Q.86.4 |
International Freephone Service (IFS)
|
| Q.86.7 |
International Telecommunication Charge Card (ITCC)
|
| Q.87.1 |
User-to-user signalling (UUS) |
| Q.87.2 |
Stage
2 description for additional information transfer supplementary
services : User signalling bearer services
Empty Recommendation. This service has only been identified and
requires further study. |
| Q.101 |
Facilities provided in international semi-automatic working
|
| Q.102 |
Facilities provided in international automatic working
|
| Q.103 |
Numbering used |
| Q.104 |
Language digit or discriminating digit
|
| Q.105 |
National (significant) number |
| Q.106 |
The
sending-finished signal |
| Q.107 |
Standard sending sequence of forward address information
|
| Q.107bis |
Analysis of forward address information for routing
|
| Q.108 |
One-way or both-way operation of international circuits
|
| Q.109 |
Transmission of the answer signal in international exchanges
|
| Q.110 |
General aspects of the utilization of standardized CCITT
signalling systems on PCM links |
| Q.112 |
Signal levels and signal receiver sensitivity
|
| Q.113 |
Connection of signal receivers in the circuit
|
| Q.114 |
Typical transmission requirements for signal senders and
receivers |
| Q.115 |
Logic
for the control of echo control devices
Renumbered as Q.115.1 when revised in 2002 |
| Q.115.0 |
Protocols for the control of signal processing network elements
and functions |
| Q.115.1 |
Logic
for the control of echo control devices and functions
Formerly Rec. Q.115 |
| Q.115.2 |
Logic
for the control of Voice Enhancement Devices/Functions
|
| Q.116 |
Indication given to the outgoing operator or calling subscriber
in case of an abnormal condition
|
| Q.117 |
Alarms for technical staff and arrangements in case of faults
|
| Q.118 |
Abnormal conditions - Special release arrangements
|
| Q.118bis |
Indication of congestion conditions at transit exchanges
|
| Q.120-Q.139 |
Specifications of Signalling System No. 4
|
| Q.140-Q.180 |
Specifications of Signalling System No. 5
|
| Q.251-Q.300 |
Specifications of Signalling System No. 6
|
| Q.310-Q.332 |
Specifications of Signalling System R1
|
| Q.400-Q.490 |
Specifications of Signalling System R2
|
| Q.500 |
Digital local, combined, transit and international exchanges -
Introduction and field of application
|
| Q.511 |
Exchange interfaces towards other exchanges
|
| Q.512 |
Digital exchange interfaces for subscriber access
|
| Q.513 |
Digital exchange interfaces for operations, administration and
maintenance |
| Q.521 |
Digital exchange functions |
| Q.522 |
Digital exchange connections, signalling and ancillary functions
|
| Q.541 |
Digital exchange design objectives - General
|
| Q.542 |
Digital exchange design objectives - Operations and maintenance
|
| Q.543 |
Digital exchange performance design objectives
|
| Q.544 |
Digital exchange measurements |
| Q.551 |
Transmission characteristics of digital exchanges
|
| Q.552 |
Transmission characteristics at 2-wire analogue interfaces of
digital exchanges |
| Q.553 |
Transmission characteristics at 4-wire analogue interfaces of
digital exchanges |
| Q.554 |
Transmission characteristics at digital interfaces of digital
exchanges |
| Q.601-Q.695 |
Lists
and meanings of FITEs, BITEs and SPITEs - Representation of
information contents of signals of the signalling systems
|
| Q.602 |
Interworking of signalling systems - Introduction
|
| Q.603 |
Events |
| Q.604 |
Interworking of signalling systems - Information analysis tables
|
| Q.605 |
Drawing conventions |
| Q.606 |
Logic
procedures |
| Q.607 |
Interworking requirements for new signalling systems
|
| Q.608 |
Miscellaneous interworking aspects
|
| Q.611 |
Logic
procedures for incoming signalling system No. 4
|
| Q.612 |
Logic
procedures for incoming signalling system No. 5
|
| Q.613 |
Logic
procedures for incoming signalling system No. 6
|
| Q.614 |
Logic
procedures for incoming Signalling System No. 7 (TUP)
|
| Q.615 |
Logic
procedures for incoming signalling system R1
|
| Q.616 |
Logic
procedures for incoming signalling system R2
|
| Q.617 |
Logic
procedures for incoming signalling system No. 7 (ISUP)
|
| Q.621 |
Logic
procedures for outgoing signalling system No. 4
|
| Q.622 |
Logic
procedures for outgoing signalling system No. 5
|
| Q.623 |
Logic
procedures for outgoing signalling system No. 6
|
| Q.624 |
Logic
procedures for outgoing Signalling System No. 7 (TUP)
|
| Q.625 |
Logic
procedures for outgoing signalling system R1
|
| Q.626 |
Logic
procedures for outgoing signalling system R2
|
| Q.627 |
Logic
procedures for outgoing Signalling System No. 7 (ISUP)
|
| Q.634 |
Logic
procedures for interworking of signalling system No. 4 to R2
|
| Q.642 |
Logic
procedures for interworking of signalling system No. 5 to No. 6
|
| Q.643 |
Logic
procedures for interworking of signalling system No. 5 to No. 7
(TUP) |
| Q.644 |
Logic
procedures for interworking of signalling system No. 5 to R1
|
| Q.645 |
Logic
procedures for interworking of signalling system No. 5 to R2
|
| Q.646 |
Logic
procedures for interworking of Signalling System No. 5 to
Signalling System No. 7 (ISUP) |
| Q.652 |
Logic
procedures for interworking of signalling system No. 6 to No. 5
|
| Q.653 |
Logic
procedures for interworking of signalling system No. 6 to No. 7
(TUP) |
| Q.654 |
Logic
procedures for interworking of signalling system No. 6 to R1
|
| Q.655 |
Logic
procedures for interworking of signalling system No. 6 to R2
|
| Q.656 |
Logic
procedures for interworking of Signalling System No. 6 to
Signalling System No. 7 (ISUP) |
| Q.662 |
Logic
procedures for interworking of signalling system No. 7 (TUP) to
No. 5 |
| Q.663 |
Logic
procedures for interworking of signalling system No. 7 (TUP) to
No. 6 |
| Q.664 |
Logic
procedures for interworking of signalling system No. 7 (TUP) to
No. 7 (TUP) |
| Q.665 |
Logic
procedures for interworking of signalling system No. 7 (TUP) to
R1 |
| Q.666 |
Logic
procedures for interworking of signalling system No. 7 (TUP) to
R2 |
| Q.667 |
Logic
procedures for interworking of Signalling System No. 7 (TUP) to
Signalling System No. 7 (ISUP) |
| Q.671 |
Logic
procedures for interworking of signalling system R1 to No. 5
|
| Q.672 |
Logic
procedures for interworking of signalling system R1 to No. 6
|
| Q.673 |
Logic
procedures for interworking of signalling system R1 to No. 7
(TUP) |
| Q.674 |
Logic
procedures for interworking of signalling system R1 to R2
|
| Q.675 |
Logic
procedures for interworking of Signalling System R1 to
Signalling System No. 7 (ISUP) |
| Q.681 |
Logic
procedures for interworking of signalling system R2 to No. 4
|
| Q.682 |
Logic
procedures for interworking of signalling system R2 to No. 5
|
| Q.683 |
Logic
procedures for interworking of signalling system R2 to No. 6
|
| Q.684 |
Logic
procedures for interworking of signalling system R2 to No. 7
(TUP) |
| Q.685 |
Logic
procedures for interworking of signalling system R2 to R1
|
| Q.686 |
Logic
procedures for interworking of Signalling System R2 to
Signalling System No. 7 (ISUP) |
| Q.690 |
Logic
procedures for interworking of Signalling System No. 7 (ISUP) to
No. 5 |
| Q.691 |
Logic
procedures for interworking of Signalling System No. 7 (ISUP) to
No. 6 |
| Q.692 |
Logic
procedures for interworking of Signalling System No. 7 (ISUP) to
No. 7 (TUP) |
| Q.694 |
Logic
procedures for interworking of signalling system No. 7 (ISUP) to
R1 |
| Q.695 |
Logic
procedures for interworking of Signalling System No. 7 (ISUP) to
R2 |
| Q.696 |
Interworking between the Signalling System No. 7 ISDN User Part
(ISUP) and Signalling Systems No. 5, R2 and Signalling System
No. 7 TUP |
| Q.698 |
Interworking of Signalling System No. 7 ISUP, TUP and Signalling
System No. 6 using arrow diagrams
|
| Q.699 |
Interworking between ISDN access and non-ISDN access over ISDN
User Part of Signalling System No. 7
|
| Q.699.1 |
Interworking between ISDN access and non-ISDN access over ISDN
user part of Signalling System No. 7: Support of VPN
applications with PSS1 information flows
|
| Q.700 |
Introduction to CCITT Signalling System No. 7
|
| Q.701 |
Functional description of the message transfer part (MTP) of
Signalling System No. 7 |
| Q.702 |
Signalling data link |
| Q.703 |
Signalling link |
| Q.704 |
Signalling network functions and messages
Covering note, 17.09.99: Erratum (english only) |
| Q.705 |
Signalling network structure |
| Q.706 |
Message transfer part signalling performance
|
| Q.707 |
Testing and maintenance |
| Q.708 |
Assignment procedures for international signalling point codes
|
| Q.709 |
Hypothetical signalling reference connection
|
| Q.710 |
Simplified MTP version for small systems
|
| Q.711 |
Functional description of the signalling connection control part
|
| Q.712 |
Definition and function of signalling connection control part
messages |
| Q.713 |
Signalling connection control part formats and codes
|
| Q.714 |
Signalling connection control part procedures
|
| Q.715 |
Signalling connection control part user guide
|
| Q.716 |
Signalling System No. 7 - Signalling connection control part (SCCP)
performance |
| Q.721 |
Functional description of the Signalling System No. 7 Telephone
User Part (TUP) |
| Q.722 |
General function of telephone messages and signals
|
| Q.723 |
Telephone user part formats and codes
A Corrigendum was indicated in 03/1993. |
| Q.724 |
Telephone user part signalling procedures
|
| Q.725 |
Signalling performance in the telephone application
|
| Q.730 |
ISDN
user part supplementary services
|
| Q.731.1 |
Direct-dialling-In (DDI) |
| Q.731.3 |
Calling line identification presentation (CLIP)
|
| Q.731.4 |
Calling line identification restriction (CLIR)
|
| Q.731.5 |
Connected line identification presentation (COLP)
|
| Q.731.6 |
Connected line identification restriction (COLR)
|
| Q.731.7 |
Malicious call identification (MCID)
|
| Q.731.8 |
Stage
3 description for number identification supplementary services
using Signalling System No. 7 : Sub-addressing (SUB)
Published with ITU-T Q.731.1. |
| Q.732.2 |
Call
diversion services
Call diversion Recommendation groups four services the stage 3
descriptions of which are similar: Q.732.2 - Call Forwarding
Busy (CFB) Q.732.3 - Call Forwarding No Reply (CFNR) Q.732.4 -
Call Forwarding Unconditional (CFU) Q.732.5 - Call Deflection
(CD). |
| Q.732.7 |
Explicit Call Transfer |
| Q.733.1 |
Call
waiting (CW) |
| Q.733.2 |
Stage
3 description for call completion supplementary services using
Signalling System No. 7 : Call hold (HOLD)
Published with ITU-T Q.733.4. |
| Q.733.3 |
Completion of calls to busy subscriber (CCBS)
|
| Q.733.4 |
Stage
3 description for call completion supplementary services using
Signalling System No. 7 : Terminal portability (TP)
Published with ITU-T Q.733.2. |
| Q.733.5 |
Completion of calls on no reply |
| Q.734.1 |
Stage
3 description for multiparty supplementary services using
Signalling System No. 7 : Conference calling
Published with ITU-T Q.734.2. Covering note, June 1999:
Information note
|
| Q.734.2 |
Three-party service |
| Q.735.1 |
Closed user group (CUG) |
| Q.735.3 |
Multi-level precedence and preemption
|
| Q.735.6 |
Global Virtual Network Service (GVNS)
|
| Q.736.1 |
International Telecommunication Charge Card (ITCC)
|
| Q.736.3 |
Reverse charging (REV) |
| Q.737.1 |
User-to-user signalling (UUS) |
| Q.741 |
[Withdrawn] Signalling System No. 7 -
Data user part
This Recommendation was published under alias number X.61. It
was discontinued because it was no longer used |
| Q.750 |
Overview of Signalling System No. 7 management
|
| Q.751.1 |
Network element management information model for the Message
Transfer Part (MTP) |
| Q.751.2 |
Network element management information model for the Signalling
Connection Control Part |
| Q.751.3 |
Network element information model for MTP accounting
|
| Q.751.4 |
Network element information model for SCCP accounting and
accounting verification |
| Q.752 |
Monitoring and measurements for Signalling System No. 7 networks
|
| Q.753 |
Signalling System No. 7 management functions MRVT, SRVT and CVT
and definition of the OMASE-user
|
| Q.754 |
Signalling System No. 7 management Application Service Element
(ASE) definitions |
| Q.755 |
Signalling System No. 7 protocol tests
|
| Q.755.1 |
MTP
Protocol Tester |
| Q.755.2 |
Transaction capabilities test responder
|
| Q.756 |
Guidebook to Operations, Maintenance and Administration Part (OMAP)
|
| Q.761 |
Signalling System No. 7 - ISDN User Part functional description
|
| Q.762 |
Signalling System No. 7 - ISDN User Part general functions of
messages and signals |
| Q.763 |
Signalling System No. 7 - ISDN User Part formats and codes
|
| Q.764 |
Signalling System No. 7 - ISDN User Part signalling procedures
|
| Q.765 |
Signalling system No. 7 - Application transport mechanism
|
| Q.765bis |
Signalling system No. 7 - Application transport mechanism: Test
suite structure and test purposes (TSS & TP)
|
| Q.765.1 |
Signalling system No. 7 - Application transport mechanism:
Support of VPN applications with PSS1 information flows
|
| Q.765.1bis |
Abstract test suite for the APM support of VPN applications
|
| Q.765.4 |
Signalling system No. 7 - Application transport mechanism:
Support of the generic addressing and transport protocol
|
| Q.765.5 |
Signalling system No. 7 - Application transport mechanism:
Bearer Independent Call Control (BICC)
|
| Q.766 |
Performance objectives in the integrated services digital
network application |
| Q.767 |
Application of the ISDN User Part of CCITT signalling system No.
7 for international ISDN interconnections
|
| Q.768 |
Signalling interface between an international switching centre
and an ISDN satellite subnetwork
|
| Q.769.1 |
Signalling system No. 7 - ISDN user part enhancements for the
support of number portability |
| Q.771 |
Functional description of transaction capabilities
|
| Q.772 |
Transaction capabilities information element definitions
|
| Q.773 |
Transaction capabilities formats and encoding
|
| Q.774 |
Transaction capabilities procedures
|
| Q.775 |
Guidelines for using transaction capabilities
|
| Q.780 |
Signalling System No. 7 test specification - General description
|
| Q.781 |
MTP
level 2 test specification |
| Q.782 |
MTP
level 3 test specification |
| Q.783 |
TUP
test specification |
| Q.784 |
TTCN
version of Recommendation Q.784 |
| Q.784.1 |
ISUP
basic call test specification: Validation and compatibility for
ISUP'92 and Q.767 protocols |
| Q.784.2 |
ISUP
basic call test specification: Abstract test suite for ISUP'92
basic call control procedures
This Recommendation includes one diskette containing Annex D
ISUP'92 ATS for basic call in graphical and in machine
processable form. |
| Q.784.3 |
ISUP
'97 basic call control procedures - Test suite structure and
test purposes (TSS & TP) |
| Q.785 |
ISUP
protocol test specification for supplementary services
|
| Q.785.2 |
ISUP’97 supplementary services - Test suite structure and test
purposes (TSS & TP)
This Recommendation includes one CD-ROM containing the ISUP'97
ATS for supplementary services in machine processable form and
in graphical form. |
| Q.786 |
SCCP
test specification |
| Q.787 |
Transaction Capabilities (TC) test specification
|
| Q.788 |
User-network-interface to user-network-interface compatibility
test specifications for ISDN, non-ISDN and undetermined accesses
interworking over international ISUP
|
| Q.795 |
[Withdrawn] Operations, Maintenance and
Administration Part (OMAP)
The content of this Recommendation is now covered by ITU-T Q.75x
series
|
| Q.811 |
Lower
layer protocol profiles for the Q and X interfaces
|
| Q.812 |
Upper
layer protocol profiles for the Q and X interfaces
|
| Q.813 |
Security Transformations Application Service Element for Remote
Operations Service Element (STASE-ROSE)
|
| Q.814 |
Specification of an electronic data interchange interactive
agent |
| Q.815 |
Specification of a security module for whole message protection
|
| Q.816 |
CORBA-based TMN services |
| Q.816.1 |
CORBA-based TMN services: Extensions to support coarse-grained
interfaces |
| Q.816.2 |
CORBA-based TMN services: Extensions to support service-oriented
interfaces |
| Q.817 |
TMN
PKI - Digital certificates and certificate revocation lists
profiles |
| Q.821 |
Stage
2 and Stage 3 description for the Q3 interface - Alarm
Surveillance |
| Q.821.1 |
CORBA-based TMN alarm surveillance service
|
| Q.822 |
Stage
1, stage 2 and stage 3 description for the Q3 interface -
Performance management |
| Q.822.1 |
CORBA-based TMN performance management service
|
| Q.823 |
Stage
2 and stage 3 functional specifications for traffic management
|
| Q.823.1 |
Management Conformance Statement Proformas
|
| Q.824.0 |
Common information |
| Q.824.1 |
Integrated Services Digital Network (ISDN) basic and primary
rate access |
| Q.824.2 |
Integrated Services Digital Network (ISDN) supplementary
services |
| Q.824.3 |
Integrated Services Digital Network (ISDN) optional user
facilities |
| Q.824.4 |
Integrated Services Digital Network (ISDN) teleservices
|
| Q.824.5 |
Configuration management of V5 interface environments and
associated customer profiles |
| Q.824.6 |
Broadband switch management |
| Q.824.7 |
Enhanced Broadband Switch |
| Q.825 |
Specification of TMN applications at the Q3 interface: Call
detail recording |
| Q.826 |
Routing management model |
| Q.827.1 |
Requirements and analysis for the common management functions of
NMS-EMS interfaces |
| Q.831 |
Fault
and performance management of V5 interface environments and
associated customer profiles |
| Q.831.1 |
Access Management for V5 |
| Q.832.1 |
VB5.1
Management |
| Q.832.2 |
VB5.2
Management |
| Q.832.3 |
Broadband access coordination
5286 |
| Q.833.1 |
Asymmetric digital subscriber line (ADSL) - Network element
management: CMIP model |
| Q.834.1 |
ATM-PON
requirements and managed entities for the network and network
element views |
| Q.834.2 |
[Withdrawn] ATM-PON requirements and
managed entities for the network view
Content having been merged into 2004 version of ITU-T Rec.
Q.834.1 |
| Q.834.3 |
A UML
description for management interface requirements for broadband
Passive Optical Networks |
| Q.834.4 |
A
CORBA interface specification for Broadband Passive Optical
Networks based on UML interface requirements
|
| Q.835 |
Line
and line circuit test management of ISDN and analogue customer
accesses |
| Q.836.1 |
SSF
management information model |
| Q.837.1 |
SDH-DLC functional requirements for the network and network
element views |
| Q.838.1 |
Requirements and analysis for the management interface of
Ethernet passive optical networks (EPON)
|
| Q.840.1 |
Requirements and Analysis for NMS-EMS Management Interface of
Ethernet over Transport and Metro Ethernet Network (EoT/MEN)
|
| Q.850 |
Usage
of cause and location in the Digital Subscriber Signalling
System No. 1 and the Signalling System No. 7 ISDN User Part
|
| Q.860 |
Integrated services digital network (ISDN) and broadband
integrated services digital network (B-ISDN) generic addressing
and transport (GAT) protocol |
| Q.920 |
ISDN
user-network interface data link layer - General aspects
This Recommendation is also included but not published in I
series under alias number I.440 |
| Q.921 |
ISDN
user-network interface - Data link layer specification
This Recommendation is also included but not published in I
series under alias number I.441. |
| Q.921bis |
Abstract test suite for LAPD conformance testing
This Recommendation includes 5 diskettes containing postscript
files of ATS for testing conformance of basic rate user side
equipment to Rec. Q.921. |
| Q.922 |
ISDN
data link layer specification for frame mode bearer services
|
| Q.923 |
Specification of a synchronization and coordination function for
the provision of the OSI connection-mode network service in an
ISDN environment |
| Q.930 |
ISDN
user-network interface layer 3 - General aspects
This Recommendation is also included but not published in I
series under alias number I.450 |
| Q.931 |
ISDN
user-network interface layer 3 specification for basic call
control
This Recommendation is also included but not published in I
series under alias number I.451 |
| Q.932 |
Digital subscriber signalling system No. 1 - Generic procedures
for the control of ISDN supplementary services
This Recommendation is also included but not published in
I series under alias number I.452. |
| Q.933 |
ISDN
Digital Subscriber Signalling System No. 1 (DSS1) - Signalling
specifications for frame mode switched and permanent virtual
connection control and status monitoring
|
| Q.933bis |
Abstract test suite - Signalling specification for frame mode
basic call control conformance testing for permanent virtual
connections (PVCs)
This Recommendation includes one diskette containing Abstract
test suites Section II corresponding to additional procedures
for PVCs as per ITU-T Q.933 Annex A. |
| Q.939 |
Typical DSS 1 service indicator codings for ISDN
telecommunications services |
| Q.940 |
ISDN
user-network interface protocol for management - General aspects
|
| Q.941 |
ISDN
user-network interface protocol profile for management
|
| Q.950 |
Supplementary services protocols, structure and general
principles |
| Q.951.1 |
Direct-dialling-in (DDI)
Q.951 parts 1, 2 and 8 published together |
| Q.951.2 |
Multiple subscriber number (MSN)
Q.951 parts 1, 2 and 8 published together |
| Q.951.3 |
Calling line identification presentation
Q.951 parts 3-6 published together |
| Q.951.4 |
Calling line identification restriction
Q.951 parts 3-6 published together |
| Q.951.5 |
Connected line identification presentation
Q.951 parts 3-6 published together |
| Q.951.6 |
Connected line identification restriction
Q.951 parts 3-6 published together |
| Q.951.7 |
Malicious Call Identification (MCID)
|
| Q.951.8 |
Sub-addressing (SUB)
Q.951 parts 1, 2 and 8 published together |
| Q.952 |
Stage
3 description for call offering supplementary services using DSS 1
- Diversion supplementary services
|
| Q.952.7 |
Stage
3 description for call offering supplementary services using DSS 1
- Explicit Call Transfer (ECT) |
| Q.953.1 |
Call
waiting |
| Q.953.2 |
Call
hold |
| Q.953.3 |
Completion of Calls to Busy Subscribers (CCBS)
|
| Q.953.4 |
Terminal Portability (TP) |
| Q.953.5 |
Stage
3 description for call completion supplementary services using
DSS 1 : Call Completion on No Reply (CCNR)
This Recommendation includes one diskette containing the SDL
process diagrams of DSS1 CCNR in machine processable form and in
graphical form.
|
| Q.954.1 |
Stage
3 description for multiparty supplementary services using DSS 1
: Conference calling
Covering note, June 1999: Information note |
| Q.954.2 |
Three-party (3PTY) |
| Q.955.1 |
Closed user group |
| Q.955.3 |
Multi-level precedence and preemption (MLPP)
|
| Q.956.2 |
Advice of charge |
| Q.956.3 |
Reverse charging |
| Q.957.1 |
User-to-User Signalling (UUS) |
| Q.1000 |
[Withdrawn] Structure of the
Q.1000-Series Recommendations for public land mobile networks
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1001 |
General aspects of public land mobile networks
|
| Q.1002 |
[Withdrawn] Network functions
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1003 |
[Withdrawn] Location registration
procedures
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1004 |
[Withdrawn] Location register
restoration procedures
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1005 |
[Withdrawn] Handover procedures
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1031 |
[Withdrawn] General signalling
requirements on interworking between the ISDN or PSTN and the
PLMN
Formerly Q.70 (1984). This Recommendation was deleted on
24/12/2003 since it has become obsolete, due to the evolution of
the work on mobile networks |
| Q.1032 |
[Withdrawn] Signalling requirements
relating to routing of calls to mobile subscribers
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1051 |
[Withdrawn] Mobile application Part
This Recommendation was made for second generation of mobile
systems. For this generation, three specifications have been
developed by regional standards organizations. These
implementations were complying with the philosophy of intentions
of the Q.1000-Series of Recommendations, but they were modified
and enhanced to include new functions and to handle regional
network dependant features. These regional specifications
supersede ITU-T Q.1051 (1988) |
| Q.1061 |
[Withdrawn] General aspects and
principles relating to digital PLMN access signalling reference
points
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1062 |
[Withdrawn] Digital PLMN access
signalling reference configurations
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1063 |
[Withdrawn] Digital PLMN channel
structures and access capabilities at the radio interface (Um
reference point)
This Recommendation was deleted on 24/12/2003 since it has
become obsolete, due to the evolution of the work on mobile
networks |
| Q.1100 |
Structure of the Recommendations on the INMARSAT mobile
satellite systems |
| Q.1101 |
General requirements for the interworking of the terrestrial
telephone network and INMARSAT Standard A system
|
| Q.1102 |
Interworking between Signalling System R2 and INMARSAT Standard
A system |
| Q.1103 |
Interworking between Signalling System No. 5 and INMARSAT
Standard A system |
| Q.1111 |
Interfaces between the INMARSAT Standard B system and the
international public switched telephone network/ISDN
|
| Q.1112 |
Procedures for interworking between INMARSAT Standard-B system
and the international public switched telephone network/ISDN
|
| Q.1151 |
Interfaces for interworking between the INMARSAT aeronautical
mobile-satellite system and the international public switched
telephone network/ISDN |
| Q.1152 |
Procedures for interworking between INMARSAT aeronautical mobile
satellite system and the international public switched telephone
network/ISDN |
| Q.1200 |
General series Intelligent Network Recommendation structure
|
| Q.1201 |
Principles of intelligent network architecture
This Recommendation is published with the double number Q.1201
and I.312. For more details see I.312 |
| Q.1202 |
Intelligent network - Service plane architecture
This Recommendation is published with the double number Q.1202
and I.328. For more details see I.328 |
| Q.1203 |
Intelligent network - Global functional plane architecture
This Recommendation is published with the double number Q.1203
and I.329. For more details see I.329 |
| Q.1204 |
Intelligent network distributed functional plane architecture
|
| Q.1205 |
Intelligent network physical plane architecture
|
| Q.1208 |
General aspects of the Intelligent Network Application protocol
|
| Q.1210 |
Q.1210-series intelligent network Recommendation structure
|
| Q.1211 |
Introduction to intelligent network capability set 1
|
| Q.1213 |
Global functional plane for intelligent network CS-1
|
| Q.1214 |
Distributed functional plane for intelligent network CS-1
|
| Q.1215 |
Physical plane for intelligent network CS-1
|
| Q.1218 |
Interface Recommendation for intelligent network CS-1
|
| Q.1219 |
Intelligent network user's guide for Capability Set 1
|
| Q.1220 |
Q.1220-series Intelligent Network Capability Set 2
Recommendation structure |
| Q.1221 |
Introduction to Intelligent Network Capability Set 2
|
| Q.1222 |
Service plane for Intelligent Network Capability Set 2
|
| Q.1223 |
Global functional plane for intelligent network Capability Set 2
|
| Q.1224 |
Distributed functional plane for intelligent network Capability
Set 2
This Recommendation is published in three fascicles.
|
| Q.1225 |
Physical plane for Intelligent Network Capability Set 2
|
| Q.1228 |
Interface Recommendation for intelligent network Capability Set
2
This Recommendation includes 3 diskettes containing Q.1228 SDL
diagrams in SDT source format and in PDF format. |
| Q.1229 |
Intelligent Network user's guide for Capability Set 2
This Recommendation is published in 5 fascicles. |
| Q.1231 |
Introduction to Intelligent Network Capability Set 3
|
| Q.1236 |
Intelligent Network Capability Set 3 - Management Information
Model Requirements and Methodology
|
| Q.1237 |
Extensions to Intelligent Network Capability Set 3 in support of
B-ISDN |
| Q.1238.1 |
Common aspects |
| Q.1238.2 |
Interface Recommendation for intelligent network capability set
3 : SCF-SSF interface |
| Q.1238.3 |
Interface Recommendation for intelligent network capability set
3 : SCF-SRF interface |
| Q.1238.4 |
Interface Recommendation for intelligent network capability set
3 : SCF-SDF interface |
| Q.1238.5 |
Interface Recommendation for intelligent network capability set
3 : SDF-SDF interface |
| Q.1238.6 |
Interface Recommendation for intelligent network capability set
3: SCF-SCF interface |
| Q.1238.7 |
Interface Recommendation for intelligent network capability set
3 : SCF-CUSF interface |
| Q.1241 |
Introduction to Intelligent Network Capability Set 4
|
| Q.1244 |
Distributed functional plane for Intelligent Network Capability
Set 4 |
| Q.1248.1 |
Interface Recommendation for Intelligent Network Capability Set
4: Common aspects |
| Q.1248.2 |
Interface recommendation for Intelligent Network Capability Set
4: SCF-SSF Interface |
| Q.1248.3 |
Interface recommendation for Intelligent Network Capability Set
4 : Interface Recommendation for Intelligent Network Capability
Set 4: SCF-SRF interface |
| Q.1248.4 |
Interface Recommendation for Intelligent Network Capability Set
4: SCF-SDF interface |
| Q.1248.5 |
Interface recommendation for Intelligent Network Capability Set
4 : Interface Recommendation for Intelligent Network Capability
Set 4: SDF-SDF interface |
| Q.1248.6 |
Interface Recommendation for Intelligent Network Capability Set
4: SCF-SCF interface |
| Q.1248.7 |
Interface Recommendation for Intelligent Network capability set
4: SCF-CUSF Interface |
| Q.1290 |
Glossary of terms used in the definition of intelligent networks
|
| Q.1300 |
Telecommunication applications for switches and computers (TASC)
- General overview |
| Q.1301 |
Telecommunication applications for switches and computers (TASC)
- TASC Architecture |
| Q.1302 |
Telecommunication applications for switches and computers (TASC)
- TASC functional services |
| Q.1303 |
Telecommunication applications for switches and computers (TASC)
- TASC Management: Architecture, methodology and requirements
|
| Q.1400 |
Architecture framework for the development of signalling and
OA&M protocols using OSI concepts
|
| Q.1521 |
Requirements on underlying networks and signalling protocols to
support UPT |
| Q.1531 |
UPT
security requirements for Service Set 1
|
| Q.1541 |
UPT
stage 2 for Service Set 1 on IN CS-1 - Procedures for universal
personal telecommunication: Functional modelling and information
flows |
| Q.1542 |
UPT
stage 2 for Service Set 1 on IN CS-2 - Procedures for universal
personal telecommunication: Functional modelling and information
flows |
| Q.1551 |
Application of Intelligent Network Application Protocols (INAP)
CS-1 for UPT service set 1 |
| Q.1600 |
Signalling System No. 7 - Interaction between ISUP and INAP
|
| Q.1600bis |
Signalling system No. 7 - Interaction between ISDN user part
ISUP '97 and INAP CS-1: Test suite structure and test purposes (TSS
& TP) |
| Q.1601 |
Signalling system No. 7 - Interaction between N-ISDN and INAP
CS-2 |
| Q.1701 |
Framework for IMT-2000 networks |
| Q.1702 |
Long-term vision of network aspects for systems beyond IMT-2000
|
| Q.1703 |
Service and network capabilities framework of network aspects
for systems beyond IMT-2000 |
| Q.1706 |
Mobility management requirements for NGN
|
| Q.1711 |
Network functional model for IMT-2000
|
| Q.1721 |
Information flows for IMT-2000 capability set 1
|
| Q.1731 |
Radio-technology independent requirements for IMT-2000 layer 2
radio interface |
| Q.1741.1 |
IMT-2000 references to release 1999 of GSM evolved UMTS core
network with UTRAN access network
|
| Q.1741.2 |
IMT-2000 references to release 4 of GSM evolved UMTS core
network with UTRAN access network
|
| Q.1741.3 |
IMT-2000 references to release 5 of GSM evolved UMTS core
network |
| Q.1741.4 |
IMT-2000 References to Release 6 of GSM evolved UMTS Core
Network |
| Q.1742.1 |
IMT-2000 references to ANSI-41 evolved core network with
cdma2000 access network |
| Q.1742.2 |
IMT-2000 references (approved as of 11 July 2002) to ANSI-41
evolved core network with cdma2000 access network
|
| Q.1742.3 |
IMT-2000 references (approved as of 30 June 2003) to ANSI-41
evolved core network with cdma2000 access network
|
| Q.1742.4 |
IMT-2000 references (approved as of 30 June 2004) to ANSI-41
evolved core network with cdma2000 access network
|
| Q.1742.5 |
IMT
2000 references (approved as of 31 December 2005) to ANSI-41
evolved core network with cdma2000 access network
|
| Q.1742.6 |
IMT-2000 References (approved as of 31 December 2006) to ANSI-41
evolved Core Network with cdma2000 Access Network
|
| Q.1751 |
Internetwork signalling requirements for IMT-2000 capability set
1 |
| Q.1761 |
Principles and requirements for convergence of fixed and
existing IMT-2000 systems |
| Q.1901 |
Bearer Independent Call Control protocol
|
| Q.1902.1 |
Bearer Independent Call Control protocol (Capability Set 2):
Functional description |
| Q.1902.2 |
Bearer Independent Call Control protocol (Capability Set 2) and
Signalling System No.7 ISDN User Part: General functions of
messages and parameters |
| Q.1902.3 |
Bearer Independent Call Control protocol (Capability Set 2) and
Signalling System No.7 ISDN User Part: Formats and codes |
| Q.1902.4 |
Bearer Independent Call Control protocol (Capability Set 2):
Basic call procedures |
| Q.1902.5 |
Bearer Independent Call Control protocol (Capability Set 2):
Exceptions to the application transport mechanism in the context
of BICC |
| Q.1902.6 |
Bearer Independent Call Control protocol (Capability Set 2):
Generic signalling procedures for the support of the ISDN user
part supplementary services and for bearer redirection |
| Q.1912.1 |
Interworking between Signalling System No. 7 ISDN user part and
the Bearer Independent Call Control protocol |
| Q.1912.2 |
Interworking between selected signalling systems (PSTN access,
DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control
protocol |
| Q.1912.3 |
Interworking between H.323 and the Bearer Independent Call
Control protocol |
| Q.1912.4 |
Interworking between Digital Subscriber Signalling System No. 2
and the Bearer Independent Call Control protocol |
| Q.1912.5 |
Interworking between Session Initiation Protocol (SIP) and
Bearer Independent Call Control protocol or ISDN User Part
|
| Q.1922.2 |
Interaction between the Intelligent Network Application Protocol
Capability Set 2 and the Bearer Independent Call Control
protocol |
| Q.1922.4 |
Interaction between the Intelligent Network application CS-4
protocol and the Bearer Independent Call Control protocol |
| Q.1930 |
BICC
access network protocol |
| Q.1950 |
Bearer independent call bearer control protocol |
| Q.1970 |
BICC
IP Bearer control protocol |
| Q.1980.1 |
The
Narrowband Signalling Syntax (NSS) - Syntax definition
|
| Q.1990 |
BICC
Bearer Control Tunnelling Protocol
|
| Q.2010 |
Broadband integrated services digital network overview -
Signalling capability set 1, release 1
|
| Q.2100 |
B-ISDN signalling ATM adaptation layer (SAAL) - Overview
description |
| Q.2110 |
B-ISDN ATM adaptation layer - Service specific connection
oriented protocol (SSCOP) |
| Q.2111 |
B-ISDN ATM adaptation layer - Service specific connection
oriented protocol in a multilink and connectionless environment
(SSCOPMCE) |
| Q.2119 |
B-ISDN ATM adaptation layer - Convergence function for SSCOP
above the frame relay core service
|
| Q.2120 |
B-ISDN meta-signalling protocol |
| Q.2130 |
B-ISDN signalling ATM adaptation layer - Service specific
coordination function for support of signalling at the
user-network interface (SSCF at UNI)
|
| Q.2140 |
B-ISDN ATM adaptation layer - Service specific coordination
function for signalling at the network node interface (SSCF at
NNI) |
| Q.2144 |
B-ISDN signalling ATM adaptation layer - Layer management for
the SAAL at the network node interface
|
| Q.2150.0 |
Generic signalling transport service
|
| Q.2150.1 |
Signalling transport converter on MTP3 and MTP3b
|
| Q.2150.2 |
Signalling transport converter on SSCOP and SSCOPMCE
|
| Q.2150.3 |
Signalling transport converter on SCTP |
| Q.2210 |
Message transfer part level 3 functions and messages using the
services of ITU-T Recommendation Q.2140
|
| Q.2220 |
Transport-Independent Signalling Connection Control Part (TI-SCCP)
|
| Q.2610 |
Usage
of cause and location in B-ISDN user part and DSS2
|
| Q.2630.1 |
AAL
type 2 signalling protocol (Capability Set 1)
|
| Q.2630.2 |
AAL
type 2 signalling protocol - Capability Set 2
|
| Q.2630.3 |
AAL
type 2 signalling protocol - Capability Set 3
|
| Q.2631.1 |
Interworking between AAL type 2 signalling protocol Capability
Set 2 and IP connection control signalling protocol Capability
Set 1 |
| Q.2632.1 |
Interworking between AAL type 2 signalling protocol Capability
Set 2 and IP connection control signalling protocol Capability
Set 1 |
| Q.2650 |
Interworking between signalling system No. 7 broadband ISDN User
Part (B-ISUP) and digital subscriber signalling system No. 2
(DSS2) |
| Q.2660 |
Interworking between signalling system No. 7 broadband ISDN user
part (B-ISUP) and narrow-band ISDN user part (N-ISUP)
|
| Q.2721.1 |
[Withdrawn] B-ISDN user part - Overview
of the B-ISDN Network Node Interface Signalling Capability Set
2, Step 1
The content of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2722.1 |
B-ISDN user part - Network node interface specification for
point-to-multipoint call/connection control
|
| Q.2723.1 |
[Withdrawn] B-ISDN User Part - Support
of additional traffic parameters for Sustainable Cell Rate and
Quality of Service
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2723.2 |
[Withdrawn] Extensions to the B-ISDN
User Part - Support of ATM transfer capability in the broadband
bearer capability parameter
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2723.3 |
[Withdrawn] Extensions to the B-ISDN
User Part - Signalling capabilities to support traffic
parameters for the Available Bit Rate (ABR) ATM transfer
capability
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2723.4 |
[Withdrawn] Extensions to the B-ISDN
User Part - Signalling capabilities to support traffic
parameters for the ATM Block Transfer (ABT) ATM transfer
capability
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2723.5 |
[Withdrawn] B-ISDN User Part - Support
of cell delay variation tolerance indication
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2723.6 |
[Withdrawn] Extensions to the
Signalling System No. 7 B-ISDN User Part - Signalling
capabilities to support the indication of the Statistical Bit
Rate configuration 2 (SBR 2) and 3 (SBR 3) ATM transfer
capabilities
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2724.1 |
B-ISDN user part - Look-ahead without state change for the
network node interface |
| Q.2725.1 |
[Withdrawn] B-ISDN User Part - Support
of negotiation during connection setup
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2725.2 |
[Withdrawn] B ISDN User Part -
Modification procedures
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2725.3 |
[Withdrawn] Extensions to the B-ISDN
User Part - Modification procedures for sustainable cell rate
parameters
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2725.4 |
[Withdrawn] Extensions to the
Signalling System No. 7 B-ISDN User Part - Modification
procedures with negotiation
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2726.1 |
[Withdrawn] B-ISDN user part - ATM end
system address
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2726.2 |
B-ISDN user part - Call priority
|
| Q.2726.3 |
B-ISDN user part - Network generated session identifier
|
| Q.2726.4 |
Extensions to the B-ISDN user part - Application generated
identifiers |
| Q.2727 |
[Withdrawn] B-ISDN user part - Support
of frame relay
The contents of this Rec. is now covered by ITU-T Recs. Q.2761,
Q.2762, Q.2763 and Q.2764 approved in 12/1999 |
| Q.2730 |
Signalling system No. 7 B-ISDN user part (B-ISUP) -
Supplementary services |
| Q.2735.1 |
Closed User Group (CUG) |
| Q.2751.1 |
Extension of Q.751.1 for SAAL signalling links
|
| Q.2761 |
Functional description of the B-ISDN user part (B-ISUP) of
signalling system No. 7 |
| Q.2762 |
General functions of messages and signals of the B-ISDN User
Part (B-ISUP) of Signalling System No. 7
|
| Q.2763 |
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Formats and
codes |
| Q.2764 |
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Basic call
procedures |
| Q.2765 |
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Application
transport mechanism (APM) |
| Q.2766.1 |
Switched virtual path capability
|
| Q.2767.1 |
Soft
PVC capability |
| Q.2769.1 |
Support of number portability information across B-ISUP
|
| Q.2920 |
Broadband integrated services digital network (B-ISDN) - Digital
Subscriber Signalling System No. 2 (DSS 2): Call/connection
control for the support of ATM-MPLS network interworking
|
| Q.2931 |
Digital Subscriber Signalling System No. 2 - User-Network
Interface (UNI) layer 3 specification for basic call/connection
control
Modified by ITU-T Q.2971 (10/1995). |
| Q.2931B |
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection
control: Protocol implementation conformance statement (PICS)
proforma
ITU-T Q.2931 B was previously numbered as Q.2931 bis during the
approval process |
| Q.2931C |
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection
control: Test suite structure and test purposes (TSS & TP) for
the user
ITU-T Q.2931 C was previously numbered as Q.2931 ter during the
approval process |
| Q.2931D |
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection
control: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT) proforma
for the user
ITU-T Q.2931 D was previously numbered as Q.2931 quater during
the approval process |
| Q.2931E |
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection
control: Test suite structure and test purposes (TSS & TP) for
the network
ITU-T Q.2931 E was previously numbered as Q.2931 quinquies
during the approval process |
| Q.2931F |
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling system No. 2 (DSS2) - User-network
interface (UNI) layer 3 specification for basic call/connection
control: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT) proforma
for the network
ITU-T Q.2931 F was previously numbered as Q.2931 sexies during
the approval process |
| Q.2932.1 |
Core
functions |
| Q.2933 |
Digital subscriber signalling system No. 2 - Signalling
specification for frame relay service
|
| Q.2934 |
Digital subscriber signalling system No. 2 - Switched virtual
path capability |
| Q.2939.1 |
Digital Subscriber Signalling System No. 2 - Application of DSS2
service-related information elements by equipment supporting
B-ISDN services |
| Q.2941.1 |
Digital Subscriber Signalling System No. 2 - Generic identifier
transport |
| Q.2941.2 |
Digital Subscriber Signalling System No. 2 - Generic identifier
transport extensions |
| Q.2941.3 |
Digital Subscriber Signalling System No. 2 - Generic identifier
transport extension for support of bearer independent call
control |
| Q.2951 |
Stage
3 description for number identification supplementary services
using B-ISDN Digital Subscriber Signalling System No. 2 (DSS2 )
- Basic Call |
| Q.2951.9 |
Support of ATM end system addressing format by Number
identification supplementary services
|
| Q.2955.1 |
Closed User Group (CUG) |
| Q.2957.1 |
Stage
3 description for additional information transfer supplementary
services using B-ISDN digital subscriber signalling system No. 2
(DSS2) - Basic call : User-to-user signalling (UUS)
Modified by ITU-T Q.2971 (10/1995). |
| Q.2959 |
Digital subscriber signalling system No. 2 - Call priority
|
| Q.2961B |
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Protocol implementation conformance
statement (PICS) proforma
ITU-T Q.2961 B was previously numbered as Q.2961 bis during the
approval process |
| Q.2961C |
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Test Suite Structure and Test Purposes (TSS
& TP) for the user
ITU-T Q.2961 C was previously numbered as Q.2961 ter during the
approval process |
| Q.2961D |
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Abstract Test Suite (ATS) and partial
Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for the user
ITU-T Q.2961 D was previously numbered as Q.2961 quater during
the approval process |
| Q.2961E |
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Test Suite Structure and Test Purposes (TSS
& TP) for the network
ITU-T Q.2961 E was previously numbered as Q.2961 quinquies
during the approval process |
| Q.2961F |
Digital subscriber signalling system No. 2 (DSS 2) - Additional
traffic parameters: Abstract Test Suite (ATS) and partial
Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for the Network
ITU-T Q.2961 F was previously numbered as Q.2961 sexies during
the approval process |
| Q.2961.1 |
Additional signalling capabilities to support traffic parameters
for the tagging option and the sustainable cell rate parameter
set |
| Q.2961.2 |
Digital subscriber signalling system No. 2 - Additional traffic
parameters : Support of ATM Transfer capability in the broadband
bearer capability information element
|
| Q.2961.3 |
Signalling capabilities to support traffic parameters for the
available bit rate (ABR) ATM transfer capability
|
| Q.2961.4 |
Signalling capabilities to support traffic parameters for the
ATM Block Transfer (ABT) ATM transfer capability
|
| Q.2961.5 |
Additional traffic parameters for cell delay variation tolerance
indication |
| Q.2961.6 |
Additional signalling procedures for the support of the SBR2 and
SBR3 ATM transfer capabilities |
| Q.2962 |
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment
phase |
| Q.2962B |
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment
phase: Protocol Implementation Conformance Statement (PICS)
proforma
ITU-T Q.2962 B was previously numbered as Q.2962 bis during the
approval process |
| Q.2962C |
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment
phase: Test suite structure and test purposes (TSS & TP) for the
user
ITU-T Q.2962 C was previously numbered as Q.2962 ter during the
approval process |
| Q.2962D |
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment
phase: Abstract test suite (ATS) and partial protocol
implementation extra information for testing (PIXIT) proforma
for the user
ITU-T Q.2962 D was previously numbered as Q.2962 quater during
the approval process |
| Q.2962E |
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment
phase: Test suite structure and test purposes (TSS & TP) for the
network
ITU-T Q.2962 E was previously numbered as Q.2962 quinquies
during the approval process |
| Q.2962F |
Digital subscriber signalling system No. 2 - Connection
characteristics negotiation during call/connection establishment
phase: Abstract test suite (ATS) and partial protocol
Implementation extra information for testing (PIXIT) proforma
for the network
ITU-T Q.2962 F was previously numbered as Q.2962 sexies during
the approval process |
| Q.2963.1 |
Peak
cell rate modification by the connection owner
|
| Q.2963.1B |
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the connection
owner: Protocol implementation conformance statement (PICS)
proforma
ITU-T Q.2963.1 B was previously numbered as Q.2963.1 bis during
the approval process |
| Q.2963.1C |
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the connection
owner: Test suite structure and test purposes (TSS & TP) for the
user
ITU-T Q.2963.1 C was previously numbered as Q.2963.1 ter during
the approval process |
| Q.2963.1D |
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the connection
owner: Abstract test suite (ATS) and partial protocol
implementation extra information for testing (PIXIT) proforma
for the user
ITU-T Q.2963.1 D was previously numbered as Q.2963.1 quater
during the approval process |
| Q.2963.1E |
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the connection
owner: Test suite structure and test purposes (TSS & TP) for the
network
ITU-T Q.2963.1 E was previously numbered as Q.2963.1 quinquies
during the approval process |
| Q.2963.1F |
Digital subscriber signalling system No. 2 - Connection
modification : Peak cell rate modification by the connection
owner: Abstract test suite (ATS) and partial protocol
implementation extra information for testing (PIXIT) proforma
for the network
ITU-T Q.2963.1 F was previously numbered as Q.2963.1 sexies
during the approval process |
| Q.2963.2 |
Modification procedures for sustainable cell rate parameters
|
| Q.2963.3 |
ATM
traffic descriptor modification with negotiation by the
connection owner |
| Q.2964.1 |
Digital subscriber signalling system No. 2 - Basic look-ahead
|
| Q.2965.1 |
Digital subscriber signalling system No. 2 - Support of Quality
of Service classes |
| Q.2965.1B |
Digital subscriber signalling system No. 2 - Support of Quality
of Service classes: Protocol Implementation Conformance
Statement (PICS) proforma
ITU-T Q.2965.1B was previously numbered as Q.2965.1 bis during
the approval process |
| Q.2965.2 |
Digital subscriber signalling system No. 2 - Signalling of
individual Quality of Service parameters
|
| Q.2965.2B |
Digital subscriber signalling system No. 2 - Signalling of
individual Quality of Service parameters: Protocol
Implementation Conformance Statement (PICS) proforma
ITU-T Q.2965.2B was previously numbered as Q.2965.1 bis during
the approval process |
| Q.2971 |
Digital Subscriber Signalling System No. 2 (DSS2) - User-network
interface layer 3 specification for point-to-multipoint
call/connection control
Modifies ITU-T Q.2931, Q.2951 and Q.2957. |
| Q.2971C |
Digital Subscriber signalling system No. 2 - User-network
interface layer 3 specification for point-to-multipoint
call/connection control: Test Suite Structure and Test Purposes
(TSS & TP) for the user
ITU-T Q.2971 C was previously numbered as Q.2971 ter during the
approval process |
| Q.2971D |
Digital subscriber signalling system No. 2 - User-network
interface layer 3 specification for point-to-multipoint
call/connection control: Abstract Test Suite (ATS) and partial
Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for the user
ITU-T Q.2971 D was previously numbered as Q.2971 quater during
the approval process |
| Q.2971E |
Digital subscriber signalling system No. 2 - User-network
interface layer 3 specification for point-to-multipoint
call/connection control: Test Suite Structure and Test Purposes
(TSS & TP) for the network
ITU-T Q.2971 E was previously numbered as Q.2971 quinquies
during the approval process |
| Q.2971F |
Digital Subscriber Signalling System No. 2 - User-network
interface layer 3 specification for point-to-multipoint
call/connection control: Abstract Test Suite (ATS) and partial
Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for the network
ITU-T Q.2971 F was previously numbered as Q.2971 sexies during
the approval process |
| Q.2981 |
Broadband Integrated Services Digital Network (B-ISDN) and
Broadband Private Integrated Services Network (B-PISN) call
control protocol |
| Q.2982 |
Broadband integrated services digital network (B-ISDN) - Digital
Subscriber Signalling System No. 2 (DSS2) - Q.2931-based
separated call control protocol |
| Q.2983 |
Broadband integrated services digital network (B-ISDN) - Digital
subscriber signalling No. 2 (DSS2) - Bearer control protocol
|
| Q.2984 |
Broadband integrated services digital network (B-ISDN) and
broadband private integrated services network (B-PISN) -
Pre-negotiation |
| Q.2991.1 |
TSS &
TP |
| Q.2991.2 |
ICS &
IXIT and ATS |
| Q.3301.1 |
Resource control protocol - Protocol at the Rs interface
|
| Q.3302.1 |
Resource control protocol - Protocol at the Rp interface
|
| Q.3303.1 |
Protocol at the interface between a Policy Decision Physical
Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE):
COPS Alternative |
| Q.3303.2 |
Protocol at the interface between a Policy Decision Physical
Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE)
(Rw interface): H.248 Alternative
|
| Q.3401 |
NGN
NNI signalling profile |
| Q.3900 |
Methods of testing and model network architecture for NGN
technical means testing as applied to public telecommunication
networks |
| Q.500SerSup1 |
Definition of relative levels, transmission loss and
attenuation/frequency distortion for digital exchanges with
complex impedances at Z interfaces
|
| Q.500SerSup2 |
Impedance strategy for telephone instruments and digital local
exchanges in the British Telecom Network
|
| Q.Sup1 |
Signalling System No. 7 testing and planning tools
|
| Q.Sup2 |
Intelligent network user's guide: Supplement for IN CS-1
|
| Q.Sup3 |
Number portability - Scope and capability set 1 architecture
|
| Q.Sup4 |
Number portability - Capability set 1 requirements for service
provider portability (All call query and Onward routing)
|
| Q.Sup5 |
Number portability - Capability set 2 requirements for service
provider portabilty (Query on release and Dropback)
|
| Q.Sup6 |
Technical report TRQ.2000: Roadmap for the TRQ.2xxx-series
technical reports |
| Q.Sup7 |
Technical report TRQ.2001: General aspects for the development
of unified signalling requirements
|
| Q.Sup8 |
Technical report TRQ.2400: Transport control signalling
requirements - Signalling requirements for AAL Type 2 link
control capability set 1 |
| Q.Sup9 |
Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series
Technical Reports |
| Q.Sup10 |
Technical Report TRQ.2002: Information Flow Elements
|
| Q.Sup11 |
Technical Report TRQ.2010: B-ISDN signalling interworking
requirements |
| Q.Sup12 |
Technical Report TRQ.2100: Coordinated call control and bearer
control signalling requirements - Root-party coordinated call
and bearer control |
| Q.Sup13 |
Technical Report TRQ.2110: Coordinated call control and bearer
control signalling requirements - Leaf-party coordinated call
and bearer control |
| Q.Sup14 |
Technical Report TRQ.2120: Coordinated call control and bearer
control signalling requirements - Third-party coordinated call
and bearer control |
| Q.Sup15 |
Technical Report TRQ.2130: Coordinated call control and bearer
control signalling requirements for leaf initiated join service
|
| Q.Sup16 |
Technical Report TRQ.2140 |
| Q.Sup17 |
Technical Report TRQ.2200 |
| Q.Sup18 |
Technical Report TRQ.2230 |
| Q.Sup19 |
Technical Report TRQ.2300: Bearer control signalling
requirements - Root-party bearer control
|
| Q.Sup20 |
Technical Report TRQ.2310: Bearer control signalling
requirements - Leaf-party bearer control
|
| Q.Sup21 |
Technical Report TRQ.2320 |
| Q.Sup22 |
Technical Report TRQ.3000: Operation of the bearer independant
call control (BICC) protocol with digital subscriber signalling
system No. 2 (DSS2) |
| Q.Sup23 |
Supplement to ITU-T Q.1901 Recommendation - Technical Report
TRQ.3010: Operation of the bearer independant call control
(BICC) protocol with AAL type 2 signalling protocol (CS-1)
|
| Q.Sup24 |
Technical Report TRQ.3020: Operation of the bearer independant
call control (BICC) protocol with broadband integrated services
digital network user part (B-ISUP) for AAL Type 1 adaptation
|
| Q.Sup25 |
Supplement to ITU-T Q.2900 series Recommendations: Broadband
integrated services digital network (B-ISDN) -Digital subscriber
signalling system No. 2 (DSS2) - User-network interface layer 3
- Overview of B-ISDN DSS2 signalling capabilities
|
| Q.Sup26 |
Broadband integrated services digital network (B-ISDN) – Digital
subscriber signalling system No. 2 (DSS2) and signalling system
No. 7 (B-ISUP) – Support of services over IP-based networks
|
| Q.Sup27 |
Technical Report - Overview of Signalling and Protocol Framework
for an Emerging Environment (SPFEE)
|
| Q.Sup28 |
Technical Report: Signalling and protocol framework for an
emerging environment (SPFEE) – Specifications for service access
|
| Q.Sup29 |
Service Modelling: Evolution to the use of object oriented
techniques |
| Q.Sup30 |
Supplement to ITU-T Recommendation Q.1701 - Roadmap to IMT-2000
Recommendations, Standards and Technical Specifications
|
| Q.Sup31 |
Technical report TRQ.2141.0: Signalling requirements for the
support of narrowband services over broadband transport
technologies - Capability set 2 (CS-2)
|
| Q.Sup32 |
Technical Report TRQ.2141.1: Signalling requirements for the
support of narrow-band services via broadband transport
technologies - CS-2 signalling flows
|
| Q.Sup33 |
Technical Report TRQ.2401: Transport control signalling
requirements - Signalling requirements for AAL type 2 link
control capability set 2 |
| Q.Sup34 |
Technical report TRQ.2410: Signalling requirements capability
set 1 for support of IP bearer control in BICC networks
|
| Q.Sup35 |
Technical Report TRQ.2500: Signalling Requirements for the
support of the call bearer control interface (CS-1)
|
| Q.Sup36 |
Technical report TRQ.3030: Operation of the bearer independent
call control (BICC) protocol (CS-2) with IP bearer control
protocol (IPBCP) |
| Q.Sup37 |
DSS1
and DSS2 Messages and information element identifiers
|
| Q.Sup38 |
Technical Report TRQ.2600: BICC signalling transport
requirements – Capability set 1 |
| Q.Sup39 |
Technical Report TRQ.2700: Requirements for signalling in access
networks that support BICC |
| Q.Sup40 |
Technical Report: Reference document on API/object interface
between network control and application layer
|
| Q.Sup41 |
Technical Report TRQ.2003: Roadmap to the BICC protocol
Recommendations, BICC interworking Recommendations, and BICC
requirement supplements |
| Q.Sup42 |
Technical Report TRQ.2402: Transport control signalling
requirements - Signalling requiremnts for AAL type 2 Link
control Capability Set 3 |
| Q.Sup43 |
Technical Report TRQ.2415: Transport control signalling
requirements - Signalling requirements for IP connection control
in radio access networks Capability Set 1
|
| Q.Sup44 |
Technical Report TRQ.2800: Transport control signalling
requirements - Signalling requirements for AAL type 2 to IP
interworking Capability Set 1 |
| Q.Sup45 |
Technical Report TRQ.2815: Requirements for interworking BICC/ISUP
network with originating/destination networks based on Session
Initiation Protocol and Session Description Protocol
|
| Q.Sup46 |
Technical Report TRQ.2830: ATM-MPLS network interworking
signalling requirements |
| Q.Sup47 |
Emergency services for IMT-2000 networks - Requirements for
harmonization and convergence |
| Q.Sup48 |
Guideline document for specifying API/object interface between
network control and application layer
|
| Q.Sup49 |
Technical Report TRQ.2840: Signalling requirements to support IP
telephony |
| Q.Sup50 |
Technical Report TRQ.2145: Requirements for a Narrowband
Signalling Syntax (NSS) |
| Q.Sup51 |
Signalling requirements for IP-QoS
|
| Q.Sup52 |
NNI
mobility management requirements for systems beyond IMT-2000
|
| Q.Sup53 |
Signalling requirements to support the International Emergency
Preference Scheme (IEPS) |
| Q.Sup54 |
Signalling requirements at the interface between SUP-FE and
S-CSC-FE |
| Q.Sup55 |
Signalling requirements at the interface between AS-FE and
S-CSC-FE |
| Q.Sup56 |
Organisation of NGN Service User Data
|
