| S.1 |
International Telegraph Alphabet No. 2
|
| S.2 |
Coding scheme using International Telegraph
Alphabet No. 2 (ITA2) to allow the transmission
of capital and small letters
|
| S.3 |
Transmission characteristics of the local end
with its termination (ITA2)
|
| S.4 |
Special use of certain characters of the
International Telegraph Alphabet No. 2
|
| S.5 |
Standardization of page-printing start-stop
equipment and cooperation between page-printing
and tape-printing start-stop equipment (ITA2)
|
| S.6 |
Characteristics of answerback units (ITA2)
|
| S.7 |
Control of teleprinter motors
|
| S.8 |
Intercontinental standardization of the
modulation rate of start-stop apparatus and of
the use of combination No. 4 in figure-shift
|
| S.9 |
Switching equipment of start-stop apparatus
|
| S.10 |
Transmission at reduced character transfer rate
over a standardized 50-baud telegraph channel
|
| S.11 |
Use of start-stop reperforating equipment for
perforated tape retransmission
|
| S.12 |
Conditions that must be satisfied by synchronous
systems operating in connection with standard
50-baud teleprinter circuits
|
| S.13 |
Use on radio circuits of 7-unit synchronous
systems giving error correction by automatic
repetition |
| S.14 |
Suppression of unwanted reception in
radiotelegraph multi-destination teleprinter
systems |
| S.15 |
Use of the telex network for data transmission
at 50 bauds |
| S.16 |
Connection to the telex network of an automatic
terminal using a V.24 DCE/DTE interface
|
| S.17 |
Answer-back unit simulators
|
| S.18 |
Conversion between International Telegraph
Alphabet No. 2 and International Alphabet No. 5
|
| S.19 |
Calling and answering in the telex network with
automatic terminal equipment
|
| S.20 |
Automatic clearing procedure for a telex
terminal |
| S.21 |
Use of display screens in telex machines
|
| S.22 |
"Conversation impossible" and or pre-recorded
message in response to J/BELL signals from a
telex terminal |
| S.23 |
Automatic request of the answerback of the
terminal of the calling party, by the telex
terminal of the called party or by the
international network
|
| S.30 |
Standardization of basic model page-printing
machine using International Alphabet No. 5
|
| S.31 |
Transmission characteristics for start-stop data
terminal equipment using International Alphabet
No. 5 |
| S.32 |
Answer-back units for 200- and 300-baud
start-stop machines in accordance with
Recommendation S.30
|
| S.33 |
Alphabets and presentation characteristics for
the intex service
|
| S.34 |
Intex terminals – Requirements to effect
interworking with the international telex
service |
| S.35 |
Answerback coding for the Intex service
|
| S.36 |
INTEX and similar services – Terminal
requirements to effect interworking between
terminals operating at different speeds
|
| S.140 |
Definitions of essential technical terms
relating to apparatus for alphabetic telegraphy
|
| S.Sup1 |
Minimal specifications for the bilingual (arabic/latin)
teleprinter |
